Clamps and Vises Tooltopia - Product Search

Also known as: OTC-3908, OTC3908; OTC AMP Clamp/Multimeter was designed to allow accurate current measurements using clamp jaws. The clamp meter is well suited for testing starting/ charging circuits, and provides easy access to current, voltage and other key automotive measurements, all in one easy to use tool. Duty Cycle Resistance Capacitance Diode Continuity Frequency Temperature Display maximum reading of 4000 counts Range auto/manual Automatic negative polarity indication Automatic zero adjustment Over range indication Low battery symbol Data hold symbol Relative measurement symbol Clamp opening size 32mm Auto power off AC/DC Voltage: 600V AC/DC Current: 1000A Operating Environment Temperature: 32 to 104°F (0°C to 40°C), Humidity: < 80% RH Storage environment temperature: -4 to 140°F (-20°C to 60°C), Humidity: < 90% RH Kit Includes: Test leads, temperature probe, soft carry case, 9-volt battery

Also known as: MCL-1350, MO 1350, MOC1350; Features and Benefits:The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa Hook end is 2 1/2" wide.Specifications: Gripping surface: 2 1/2" wide (63 mm), 1" deep (25 mm) Overall length: 8" (203 mm) Weight: 6 lbs. (2.72 kg) Capacity: 8 tons (7, 257 kg)

Also known as: MCL-0440, MO 0440, MO 440, MOC0440; Features and Benefits: Gripping surface: 4" wide (102 mm) Overall length: 8" (203 mm) Weight: 8 lbs (3.63 kg) Height: 3" (76 mm) Capacity: 5 tons (4, 536 kg)Self-tightening, twin claw jaws and drop-forged wedge distribute the clamping load - reducing the possibility of metal tearing.  Sever duty tooth is designed for maximum gripping bite and minimized metal distortion.  The jaw openings allow use around lips of core supports and aprons, clamps to floor pans and other pulls.  Made of heat treated steel.

Also known as: MCL-5800, MO 5800, MO5800, MOC5800; Mo-Clamps G Clamp means easier pulling, with multiple pulling angles.The G Clamp has a throat opening of 4 inches allowing plenty of room to get over, around and behind the damage. And the movable shackle means more versatility. Made of heat-treated alloy steel, cast for extra strength. Includes swivel pad. Specifications:Overall length: 10 1/2" wide (267 mm)Overall width: 6" (152 mm)Weight: 6 lbs. (2.72 kg)Capacity: 5 tons (4, 536 kg)Replacement Parts: #4055 Screw Pin Shackle - #520034 Main Shaft - #840065 Swivel Pad

Also known as: MCL-4050, MO 4050, MO4050; The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has raised ears to hold bolts stationary, for easy tightening. Specifications:Gripping surface: 3 3/4 wide (95 mm), 3/4 deep (19 mm)Overall length: 7 (178 mm)Weight: 8 lbs. (3.63 kg)Capacity: 4 tons (3, 629 kg) Replacement Parts: #5325 Nut, Bolt & Washer - #200130 Pull Plate - #200131 Side Pull Bracket

Also known as: MCL-0550, MO 0550, MO 550, MOC0550; Features and Benefits: Gripping Surface: 1-1/2" wide (38 mm), 1/2" deep (13 mm) Overall Length: 6-1/2" (165 mm) Weight: 3 lbs (1.36 kg) Capacity: 3 tons (2, 722 kg)Mo-Clamp’s new design, the "Tight opening clamp", has all the same gripping dimension requirements as the old design.   Redesigned and strengthened with our totally new screw drive mechanism.   Still a full 3 ton capacity, able to reach core support and upper sheet metal areas where no other can.  Perfect for small pick-up frame rails.

Also known as: MCL-0200, MO 0200, MO 200, MOC0200; Features and Benefits: Gripping surface: 2" wide (50 mm), 5/8" deep (16 mm) Overall length: 8 1/2" (215 mm) Weight: 7 lbs (3.18 kg) Capacity: 5 tons (5, 436 kg) Heat treated steelSelf-Tightening. Its 1" (39 mm), throat clearance fits over a flange or frame horn, or around a lip to pull from behind.  Original wedge and  straight cut tooth design.

Also known as: MCL-5852, MO 5852, MOC5852; 5852Large Tong ClampFeatures and Benefits:Made of Tru-Tuff heat-treated steel alloy, these clamps will provide years of prolonged service.Each clamp has pivoting jaws which conform to the surface being pulled.Provides a secure grip with up to 5 tons of capacity.Overall length: 10.5Weight: 10.5 lbsCapacity: 5 tonsThroat depth: 5Max opening: 6.5Throat closed: 4.25

Also known as: ESI-687, ESI687; With the capability of measuring down to 1 milliamp (.001A), the #687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems. Features:35 Test Ranges 10 Test Functions Auto Power Off Auto-Ranging Data Hold Continuity Beep Overload Protection Clamp opening 5/8 inches 9 Volt Battery Included Carrying Case included TEST RANGES: DC Amps: 0-4A, 80A AC Amps: 0-4A, 80A DC Volts: 0-400mV, 4V, 40V, 400V, 600V AC Volts: 0-400mV, 4V, 40V, 400V, 600V Ohms: 0-400, 4k, 40k, 400k, 4M, 40M Frequency: 0-5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 500kHz, 5MHz, 10MHz Capacitance: 0-40nF, 400nF, 4uF, 40uF, 100uF Duty Cycle: 0-.5%-99.0% Diode: Diode Test Continuity: Audible Beep

Also known as: MCL-5802, MO 5802, MOC5802; Mo-Clamp’s Jumbo G Clamp has a throat opening of 7 inches to get over, around and behind the damage. Multiple holes allow for various angle pulls. Optional Shackle (#4059) means even more versatility. Includes swivel pad.

Also known as: MCL-0680, MO 0680, MOC0680; Self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 2 1/4" high (57 mm), 1 1/4" deep (32 mm).

Also known as: MCL-6400, MO 6400, MOC6400; For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Small Bracket (2 x 3) and Large Bracket (2 x 9) included. Specifications: Overall length: 19 (482 mm) Weight: 19 lbs. (8.62 kg) Capacity 5 tons (4, 536 kg) Replacement Parts: #210020 Large Bracket - #210030 Small Bracket - #520050 Pin

Also known as: MCL-0670, MO 0670; Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 1 1/2" high (38 mm), 1 1/4" deep (32 mm).

Also known as: MCL-4065, MO 4065, MOC4065; One of the toughest little clamps we have ever built. Both straight pull or right angle with an infinite twist capability. This should end up being the technician’s true friend. Weight: 3lbs. 9oz. Jaw width: 1-7/8" Throat Depth: 1"

Also known as: MCL-0400, MO 0400; Self-Tightening The Super Clamp for the tough jobs Ultra-wide gripping surface Grabs 4 1/4 of metal Original wedge Original straight cut tooth design.

Also known as: WIL-63201, WIL1765, WIL63201; 1765 Vise 5-1/2" For general purpose service or maintenance shops not requiring the capacity of a Combination Vise, Wilton offers its Tradesman Vises. While lighter in weight, these vises include the most important Wilton design features, including our new reversible top jaws. Jaw Width: 6-1/2" Pipe Capacity: 3/8" - 3-1/2" Throat Depth: 4-3/4" Max. Opening: 6-1/2" Ship. Case Qty.: 1 Ship. Wt. Lbs.: 70

Also known as: MCL-0480, MO 0480, MOC0480; Features and Benefits: Gripping surface: 2" wide (51 mm) Overall length: 5" (127 mm) Weight: 5.7 lbs (2.6 kg) Capacity: 5 tons (4, 536 kg) Made of heat treated steelNew generation of Mo-Clamps that are self-tightening.  Provides multi-angle pulling from a single clamp.  This clamp allows the drop-forged round wedge to move within the clamp’s channel to provide the exact angle of pull needed.  While allowing it to pivot to avoid twists in the chain.  Works great!

Also known as: MCL-0551, MO 0551, MOC0551; Mo-Clamp’s re-introduced the Tight Opening Clamp because popular demands had to be met so the old design is back. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails. Gripping Surface: 1" wide (38 mm), " deep (13 mm) Overall Length: 6" (165 mm) Weight: 3 lbs (1.36 kg) Capacity: 3 tons (2, 722 kg) Heat Treated Steel. Made in the U.S.A.