Electrical Wires and Cables Tooltopia - Product Search

Also known as: MPI-880010, MPS-880010, NXQ880010; The Pro-Link iQ™ International® Engines Application v2.0 provides reprogramming and diagnostic capability for International® electronic systems. With the combined power of the easy-to-use Pro-Link iQ™ and the functionality of the International ® v2.0 applications, service bay technicians experience unprecedented out-of-the box productivity. Supports all pre-EPA ’07 International electronic engines. Basic Functions: Red Fault Codes, Clear Fault Codes, View Engine Data. Easy to use Portable No interface cable setup Key On Engine Off (KOEO)Key On Engine Running (KOER) Injector Buss Test (KOEO) Injector Contribution Test (KOER) Cylinder Cutout Test (Dual box ECMs only) Injector Disable Tests (Dual box ECMs only) Crank Inhibit Fan Control Idle Shutdown timer Warm-up device Warning and protection system Hydraulic pressure governor PTO control Radiator Shutter Vehicle Speed limit Vehicle Retarder Two Speed Axle Traction Control Glow Plug Control

Also known as: AOE-6075, ASO-6075, ASO6075; Bus Bar set for parallel charging. Ten battery capacity. Use one or combine additional bars for added capacity. Insulated fiberglass backboard with 10 pairs DC charging leads, 10 gauge, 36 long with 300 Amp insulated safety clamps. Comes with three-foot 4 AWG cables to connect to charger or additional bus bars. Made in USA

Also known as: ATD-5954, ATD5954; Max continuous power: 1500W Peak load power rate: up to 3000W For use with 12 Volt systems No load current draw: up to 1 Amp Input DC voltage range: DC 10V-15V Overload and short-circuit protection (6) Replaceable 30 Amp fuses Built-in cooling fan (2) 110V AC 3 prong grounded receptacles Overload indicator 4 AWG 24 cable (Black, Red) with battery clamp included

Also known as: ATD-5950, ATD5950; Max continuous power: 200W Peak load power rate: up to 400W For use with 12 Volt systems No load current draw: up to 0.3 Amps Waveform: modified sine wave Input DC voltage range: DC 11V-15V Overload and short-circuit protection (1) Replaceable 20 Amp fuse Built-in cooling fan (2) 110V AC 3 prong grounded receptacles Overload indicator 14 AWG 24” cigarette plug cable (Black, Red) with battery clamp included

Also known as: SOL-ES1224, SOLES1224, TCB-ES1224; Features and Benefits The versatility of 12 and 24 Volt operation from a single unit, quickly switches operating voltage with the turn of a knob Dual high performance ES Series are specifically designed for vehicle jump starting and deliver 3200 Peak Amps in 12V mode and 1600 Peak Amps in 24V mode Extra-long 60" #2 gauge cables provide exceptional power delivery and allow the unit to be ideally positioned during jump starting Industrial-Grade Hot Jaw clamps penetrate corrosion on battery terminals and provide optimal power transfer Advanced Warning System - AWS provides added safety by alerting the operator whenever specific unsafe jump starting conditions existThe ultimate in versatility, the SOLES1224 switches from 12 Volt to 24 Volt mode with a simple turn of a switch. Perfect for fleet, agricultural and industrial settings where versatile jump starting is needed. Features dual high performance ES Series batteries to deliver high output current, extended cranking power, numerous jumps per charge and a long service life.  Extra-long 60" #2 gauge cables, coupled with Industrial-grade Hot Jaw clamps provide exceptional power delivery and strong battery connections.  Other features include integrated voltage selection switch, LED battery status indicator, automatic recharging and DC outlet to power a variety of 12 volt accessories.  Comes with a 1 year limited warranty.

Also known as: ATD-5951, ATD5951; Max continuous power: 400W Peak load power rate: up to 800W For use with 12 Volt systems No load current draw: up to 0.5 Amps Input DC voltage range: DC 10V-15V Overload and short-circuit protection (1) Replaceable 40 Amp fuse Built-in cooling fan (2) 110V AC 3 prong grounded receptacles Overload indicator 14 AWG 24 cigarette plug cable (Black, Red) with battery clamp included

Also known as: PP 3LS01, PP PP3LS01, PPRPP3LS01, PWP-PP3LS01; The combination of the PPLS01 and the Power Probe is the Pros choice for diagnosing electrical circuits!The sheer simplicity of use combined with the numerous variations of connectors and adapters makes this kit a real winner!Includes: PP319FTC, cigarette lighter adapter, 3" probe tip, battery hook-up clips, 20’ extension cable, alligator clip adapter, 1’, 3’ and 6’ leads, male and female adapters, large and small piercing probes, and an instructional DVD.

Also known as: AOE-6139, ASO-6139, ASO6139; The stainless steel receptacle mounts onto a truck bumper. The extra long starting cables reach stalled vehicles up to 30 ft away. Features Associated’s patented "Stop/Go" light.Includes: 30-ft tangle free starting cable (4 AWG), side terminal adapters, polarized Lexan plug, and truck mount receptacle with power leads.

Also known as: SCUCXC-6525A, SCUCXC6525A; Features and Benefits: Micro Processor controlled, fully automatic operation 225 amps engine start, 65/40/2 amp charge settings Multi-purpose LED display for voltmeter and ammeter Measures battery voltage, alternator output and starter draw Designed for charging and testing 12V battery and systems Will charge both AGM and lead acid batteries. Unique Wheel Charger with 225 amps of engine starting assistance and charging rates of 65/40/2. Designed for charging and testing 12V batteries, alternators and starters. Digital display displays volts and amps plus charge time. Heavy Duty Cables and Clamps with tall wheels and sturdy steel chassis make this a great charger for any shop.

Also known as: JNC-JNC1224, KK JNC1224, KKC-1224, KKJNC1224, SOLJNC1224; Features and Benefits Delivers 3400 Peak Amps of jump starting power in 12 Volt mode and 1700 Peak Amps of jump starting power in 24 Volt mode Long, 46" #2 gauge cables allow convenient positioning of the unit during jump starting, while Industrial-Grade Hot Jaw clamps penetrate battery terminal corrosion and provide maximum power transfer Automatic recharging using an onboard fully automatic battery charger Battery status indicator gauge Assembled in the USA with US and imported componentsThe versatility of 12 and 24 Volt jump starting in a single, heavy-duty unit. Dual Clore PROFORMER batteries power the JNC1224 to 3400 Peak Amps in 12 Volt mode. With an easy change between voltage settings using quick connects, and an onboard automatic charger, it is as convenient as it is powerful. Includes DC outlet to power 12 volt accessories and a 1 year limited warranty.Supecedes: KKJ99058

Also known as: JNC-JNC950, KK JNC950, KKC-950, KKJNC950, SOLJNC950; Features and Benefits Rugged, durable and reliable 12 Volt jump starting for professional applications Delivers 2000 Peak Amps of jump starting power Long, 46" #2 gauge cables allow convenient positioning of the unit during jump starting, while Industrial-Grade Hot Jaw clamps penetrate battery terminal corrosion and provide maximum power transfer Volt gauge provides an accurate, detailed state of charge for the onboard battery Automatic recharging using an onboard fully automatic battery chargerThis 12 Volt-dedicated, high output unit is great for fleet, industrial and marine applications where deep cranking are the norm, not the exception. Features a Clore PROFORMER battery, a built-in fully automatic battery charger for recharging the onboard battery, volt meter and 46" #2 gauge cables with Industrial-Grade Hot Jaw clamps. Includes 12 volt outlet  to power accessories and a 1 year limited warranty.Supercedes: KKJJNC950R

Also known as: DSRPSW2550, SCUPSW-2550, SCUPSW2550, SHU-PSW-2550; Features and Benefits Large face, clear-view amp meters and volt meters with easy-to-read graduated scales 600 amp heavy duty, chrome plated steel ultra-grip clamps with plastic-coated handles and heavy-gauge spring for conductivity and long-term durability Tubular, chrome-plated handles with rubber grips and unique non-conductive clamp rests 6-foot heavy-duty, commercial gauge TPE welding-grade cables for minimal current loss and flexibility in cold temperatures Extra-long, 9-foot AC line cord for greater accessibility and reach 6 volt 125/50 amp, 12 volt 250/50/10 amp, manual battery charger and engine starter features a volt meter for testing battery voltage and charging system output voltage. Charger is fan cooled for long life.

Also known as: OTC3618TURNKEY; Features and Benefits ABS and Airbag coverage plus European software and cables Genisys training DVD coupon for instant on-demand self paced training New Smart Cable eliminates special OBDII cable inserts Over 500 bi-directional special test added to Asian 2007 softwareThe OTC3618TURNKEY includes Genisys scan tool, OBDII Smart Cable, automated system test, USA 2007 domestic software with Pathfinder, Repair-Trac, Fast Fixes, USA 2007 Asian software, InfoTech 2006 software, USA 2004 ABS/air bag software, manuals, adapters, domestic OBDI vehicle cables (for GM, Ford, Chrysler, Jeep, Saturn), 4-channel lab scope module with 4 DMM leads, ground lead, kV conventional ignition lead, GM HEI ignition adapter, ignition sync lead, manuals, smart cards and carrying case. (USA Asian OBDI cables not included; see kit OTC3421-94).

Also known as: KTI70210; Features and Benefits: 500 AMP adjustable load carbon pile Tests 12V batteries rated as high as 1000 CCA or 160 AMP hour 15 second test with audible tone Large, color-coded dual meters Can also test alternators, regulators and startersKTI’s 500 AMP carbon pile load tester is great for simulating actual cranking loads. It tests 12 volt batteries rated as high as 1000 CCA or 160 Amp hour. Quick 15 second test cycle with audible tone to indicate test completion. Unit can also test alternators, regulators and starters. Carbon pile load tester featuers 500 Amp side clamps and heavy-duty stranded copper cables. The large, color-coded dual meters make the unit easy-to-use. Also includes temperature compensation chart. One-year warranty.