Lisle Tooltopia - Product Search

Also known as: LIS-19250, LIS19250; 19250Remover Set BoltFeatures and Benefits: The 6 piece set removes standard and metric bolts, nuts and studs from 1/4" to 9/16" (6mm t 14mm). Drive the proper size remover over the bolt head, nut or stud. The remover spine cuts into the bolt head or threads for sure grip. Then use a back and forth motion with a wrench or socket to free the fastener. Works well even on flush mounted bolts and nuts. Provides a no slip grip that withstands high torque. Made of super strong, hardened tool steel for durability.Includes: 19250 Stuck bolt, nut, and stud remover set 19260 #1 remover. Fits 1/4" and 6mm 19270 #2 remover. Fits 5/16" and 8mm 19280 #3 remover. Fits 3/8" and 10mm 19290 #4 remover. Fits 7/16" and 11mm 19300 #5 remover. Fits 1/2" and 13mm 19310 #6 remover. Fits 9/16" and 14mm

Also known as: LIS-11102, LIS11102; Features and Benefits: Large 15" funnel with strainer built-in to catch drain plugs Quick release mechanism for fast raising & lowering of upper tube; total adjustment range of 23" 8 gallon translucent jug - the new shape in lift drains Reinforced base will not warp with hot oil Allows use of compact shipping carton that is not UPS oversize Has a wide working range from 36-1/2" to 74" Has a lower center of gravity for increased stability Four 2-1/2" ball bearing wheels that swivel and roll easily Heavy-duty adjustment clamp, large handle and big pour spout with threaded capThis specially shaped, translucent jug holds 8 gallons!

Also known as: LIS-65900, LIS65900; Features and Benefits: Replaces stripped spark plug threads on Ford V10, 4.6 and 5.4 liter engines Works on the car without removing the engine head This set includes a drill, tap, wedge tool, insert tool, 10 steel inserts, plus a vacuum adapter to remove shavings from the chamber Shipping wt. 9 lb. 6 oz.This precision tool accurately replaces stripped Ford spark plug threads with new thread inserts.  Works on the car without removing the engine head.  This set includes a drill, tap, wedge tool, insert tool, 10 steel inserts, plus a vacuum adapter to remove shavings from the chamber.  The tool set installs a new spark plug thread insert in the exact original position in approximately 20 minutes! NON STOCKING ITEM - DROP SHIPIMPORTANT: An inspection scope must be used to insure all shavings are removed from the combustion chamber. An inspection scope is not included.

Also known as: LIS-24610, LIS24610; Features and Benefits Enables unattended filling of the cooling system Saves time and eliminates spills and mess An additional adapter and threaded cap have been added to the set to fit screw on style adapters found on many newer GM vehicles Eliminates trapped air pockets which usually cause erratic cooling system and heater performance Fits most domestic and import cars and light trucksThe Spill Free Funnel is used to fill coolant into the cooling system. It controls the proper amount of coolant entering system and enables unattended filling of the cooling system. The funnel eliminates squeaky belts caused by coolant overflow and protects the environment. Angled neck allows use on radiator caps that are placed at an angle. Protects the environment. Supersedes Lisle #22150.

Also known as: LIS-52750, LIS52750; Features and Benefits: Dual purpose set detects both mechanical and air induced sounds. Use the black diaphragm chamber and screw-in metal probe to detect mechanical sounds from bearings, engines, transmissions, etc. For air induced sounds, attach the vinyl hose to the hollow tube and funnel assembly. The funnel amplifier will detect noises from vacuum leaks, exhaust leaks, air leaks and wind noise For hard to reach locations, remove the funnel and use the hollow tube Shipping wt. 10 oz.Have you ever had to locate or isolate a sound or leak in order to fix it?  This is a dual purpose set that helps detect both mechanical and air induced sounds.  It’s designed to find the slightest leaks, or even wind noise.  Saves time and is easy to use!

Also known as: LIS-55700, LIS55700; Features and Benefits: Master fuel injection test set test all types of fuel injection systems Set comes in a plastic blow-molded case for protection and for easy use Tests GM, Ford, Chrysler, Honda/Acura, Toyota, Bosch CIS and L-Jetronic Weight 10 lbs.This set checks fuel pressure on most port fuel injection (PFI) and throttle body injection (TBI) systems.  Comes with a variety of adapters and gauges for checking many types of systems.  Adapts to work with test port connections, end of hose connections and in-line connections.    List of component parts included with instructions.

Includes 8 Jumpers to Fit Most Popular Relays. Also Includes Test Lead Kit and Relay Puller Pliers. Jumpers have tabs for clamping and flat pads to place test leads on. No need to pierce wires or connect multiple jumper wires. Also Includes Test Lead Kit for easily and securely connecting Relay Test Jumpers to a multimeter. Jumper wire may be used between common and open to close the relay circuit for testing and has a test port to easily check voltage. Also provides access for a clamp-on amp meter. Relay Puller Pliers easily remove electrical relays without damage to the relay or electrical box.

Also known as: LIS-70340, LIS70340; Features and Benefits: Flexible magnetic holder provides a third hand Flashlight recharges in 5 hours with the AC Charger Powerful 3 Watt LED flashlight provides 120 Lumen’s and will run continuously for 6 hours The flashlight is water resistant with o-ring seals It has a powerful 2" diameter, 50 lb. magnet built-in and is 7-3/4" in overall length This powerful 3 Watt LED flashlight provides 120 lumen’s and will run continuously for 6 hours. It has a quick charge of 5 hours. The flashlight is 5.635" in length and 1.385" at the maximum diameter (barrel is 1"). Also has a flexible, magnetic holder that allows the light to be conveniently located. It’s made with flexible joints that bend up to nearly 90 degrees in any direction.

Also known as: LIS-17350, LIS17350; Use with an impact wrench to quickly stretch pipes Expands all types of exhaust pipe, including stainless steel, from 1-5/8" to 4-1/4" in size The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders Comes in a molded storage case

Also known as: LIS-17432, LIS17432; Features and Benefits: Translucent jug holds 18 gallons and will not warp with hot oil Rolls easily with four heavy-duty 2 1/2” wheels Metal tubes extend working area from 36 1/2” to 77” Drains from the bottom with a brass drain valve Large 15” funnel has a built in strainer to catch drain plugs18 Gallon Oil Lift Drain has a quick release and height adjustment.  Do your oil changes without making a mess on the floor.

Also known as: LIS-27800, LIS27800; Features and Benefits: One-person operation Two probe adapters screw on to form larger diameter probes Versatile tool tests throttle body injectors, ported fuel injectors and sequential central port injectorsUniversal Noid Light Adjustable Probes fit all electronic fuel injection systems. It’s easy to use and made with the durability to last!

Also known as: LIS-17510, LIS17510; Features and Benefits: 2-3/8" - 2-3/4" extender Attaches to the 34400 exhaust pipe and tailpipe stretcher (not included) Can be used while pipe is on the car Mini pouched  Assists in stretching pipe diameter including stainless steel pipes.

22700Code Retriever For GM. Retrieves trouble codes from late model GM vehiclesThree tools in one. Tool retrieves codes from engine computer, rear wheel anti-lock brake computer and four wheel anti-lock brake computer and four wheel anti-lock brake computer. Key probes jump terminals on Assembly Line Data Link connector (ALDL) to activate trouble codes. Refer to a repair manual for proper code interpretation. Skin-packed. Shipping weight 1 oz.

Also known as: LIS-71200, LIS71200; Removes studs from engine blocks, exhaust manifolds, cylinder heads and other applications. Allows for easy removal of studs. Tool has two holes, ½” (14m) and ¾” (19mm) for optimum fit, minimizing damage to threads. Range 3/8” (10mm)-3/4” (19mm). Design allows tool to grip flush with mounting surface of the stud so it can grab studs that are broken off very close to the mounting surface.

Also known as: LIS-40400, LIS40400; Features and Benefits: Saves memory settings from under the hood   Takes the place of traditional memory savers that use the power outlet, which no longer provides protection on newer vehicles since the outlet is switched  Unique wire piercing tip on clamp connects to battery cable  Clamps can also be used on the back of the battery terminals  Cord is 3’ longWithout a battery attached, use the unique wire insulation-piercing tip on the red (positive clamp) to connect the memory saver to the main positive battery cable. Connect the black clamp to a ground source. The light will illuminate to indicate proper connection. Connect a fully charged 9V battery (not included) and the vehicle is protected.