Oxygen Sensor Auto Parts and Accessories - Product Search

NTK Oxygen Sensors meet OE specifications for form, fit and function and have a direct-fit, OEM-style connector for installation. Most Emissions products are available for in-store pickup from Advance Auto Parts.

As air-fuel mixtures and fuel efficiency become more critical, wideband oxygen sensors are gradually replacing the original single-wire oxygen sensor. Single-wire sensors act as an on-off switch, using an abrupt change in voltage to signal a rich or lean mixture. The Bosch LSU 4.2 Wideband oxygen sensor gives a more linear response, accurately measuring mixtures as rich as 9.0:1 and as lean as pure air. This heated, 5-wire Wideband Bosch oxygen sensor (LSU 4.2) is the same sensor as supplied with the LM-2 Wideband Air/Fuel Ratio Meter Kit, Part No. 3878-001. Standard 18x1.5mm thread.

Regain Lost Power. A bad oxygen (aka O2) sensor can cause poor performance, crappy fuel economy, the dreaded check engine light, and even to fail emissions testing. So replace those worn out sensors with brand new NTK sensors for superior, consistent performance. Exceeds OEM Quality. Designed with a waterproof factory-fitted connector to ensure a perfect fit every time, NTK's oxygen sensors meet or exceed OE specifications and are built with the highest quality materials and craftsmanship to ensure a superior quality direct replacement for your worn or failed OEM sensors. Application. This NTK Performance Oxygen Sensor is designed to be a direct performance replacement for the Ford Mustang, please see NTK 22500 applications below. Front (upstream): 1994 to 1995 GT Mustangs. 1994 to 1995 Cobra Mustangs.

PLX offers replacement Bosch Wideband O2 Sensors to replace your worn out ones. Replacement is a very simple plug and play swap. Type B- D Style Connector.

Features: Bosch LSU4.2 5-wire wide-band O2 sensor Replacement sensor for LM-1, LM-2, LC-1, and LC-1ST

Caspers Electronics Oxygen Sensor Extension Harness, 36 in., 4-Terminal Flat In-line Connector, Universal, Each Please hover mouse to enlarge image Caspers Electronics Oxygen Sensor Extension Harness 109012 Notes Please check your connector shape and color to see if it matches your application. Number of Wires 4 Quantity Sold individually. Wiring Harness Length (in) 36.000 in. Wiring Harness Plug Style 4 flat female and 4 flat male Summit Racing Part Number : CEI-109012 Fitment P lease see the

NGK Oxygen Sensor is manufactured to control fuel and ignition system. It is constructed from durable material that is corrosion and abrasion resistant. This oxygen sensor features a sensor which is located before and after catalytic converter to check the amount of oxygen in the exhaust. It sends signal to the computer including air and fuel ratio timing in order to bring the engine into the optimum operating range.

Direct OE replacement. Wire length is within six inches of the factory installed sensor. Includes necessary connectors. Most Emissions products are available for in-store pickup from Advance Auto Parts.

Regain Lost Power. A bad oxygen (aka O2) sensor can cause poor performance, crappy fuel economy, the dreaded check engine light, and even to fail emissions testing. So replace those worn out sensors with brand new NTK sensors for superior, consistent performance. Exceeds OEM Quality. Designed with a waterproof factory-fitted connector to ensure a perfect fit every time, NTK's oxygen sensors meet or exceed OE specifications and are built with the highest quality materials and craftsmanship to ensure a superior quality direct replacement for your worn or failed OEM sensors. Application. This NTK Performance Oxygen Sensor is designed to be a direct performance replacement for the Ford Mustang, please see NTK 22500 applications below. Front (upstream): 1994 to 1995 GT Mustangs. 1994 to 1995 Cobra Mustangs.

The M-300TE (Tuner Edition) has 100% of the same features as the PLX Air Fuel Ratio Sensor Module with a built-in 4 digit display. It is fully compatible with other PLX iMFD gauges and can be daisy-chained with other PLX Sensor Modules. Rugged aluminum construction. 8 Selectable fuel settings. Compatible with iMFD gauges. Wideband 0-5V analog output. Narrowband 0-1V analog output. Included:. M-300TE main unit. Bosch wideband oxygen sensor. 10 Sensor harness. 4 Power wire. Dash or window mounting hardware. User manual. 4 Analog output wires and terminals. 1 iMFD serial cable.

2" AEM No-Weld O2 Sensor Mount - Our No-Weld O2 Sensor Mount enables users to mount an O2 sensor without having to weld a sensor bung onto the exhaust. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp. It's that easy! The 2 1/2" mount will fit exhausts from 2.25" to 2.5" in diameter. If you need to mount an O2 sensor and don't know how to weld or can't find someone who can, this is a permanent solution that replaces a weled in O2 bung. Now simply drilling a hole in the exhaust is all you need to do in order to add a wideband to your car!

New Mazda 3 Front Oxygen Sensor. Brand: Walker Products Inc.. Fits Years: 2006, 2007, 2008, 2009, 06, 07, 08, 09. PartsGeek offers high quality new, OEM and aftermarket products. W0133-1894340

BBK 1676 O2 Oxygen Sensor Extensions 12" Ford Mustang 1986-2004 Brand: BBK PERFORMANCE Our Part Number: B451676 Manufacturer's Part Number: 1676 UPC: 197975016768 Condition: New BBK #1676 Oxygen Sensor Extension Harnesses, 12 in., 4-Terminal Round Connector, Direct Plug-In Ford, Mustang, V8, 1986-2004, Pair. B45-1676 Description: BBK oxygen sensor extension harness sets feature a direct plug-in design to prevent the cutting and lengthening of your oxygen sensor wires.

Bosch ceramic technology affords best-in-class performance. The ceramic element is a critical part of any oxygen sensor. Most Emissions products are available for in-store pickup from Advance Auto Parts.

Eliminates Check Engine Light. If you're running an off-road H-pipe or X-pipe, Plug-in MIL eliminators will shut off the annoying Check engine light and improve performance. MIL which is short for Malfunction Indicator Light Eliminator shuts off CELs by blocking the codes generated by the rear O2 sensors when running an off road mid-pipe or some mid-pipes with ultra high-flow cats. Exceptional Build. These MIL eliminators are assembled from state of the art electronic components and include rugged plastic plug-in connectors that easily insert into the stock wiring harness. Easy Installation. Installation is straight forward and simple. Plug the MIL eliminator to the corresponding connectors. One end will plug into the oxygen sensor and the other end will plug into the vehicles wire loom. Works great on V6, GT, Bullitt, Mach One, and SVT Cobra Mustangs.

These Kinetix Racing Test Pipes for the 2003-2007 Infiniti G35 Coupe & 2003-2006 Infiniti G35 Sedan completely remove your factory catalytic converters and replaces them with a straight through design. This provides the absolute most flow possible which has shown gains on NA G35's between 4-8HP making it one of the best "bang for the buck" mods. These pipes are an absolute must on FI cars which need all the flow possible. Constructed entirely of stainless steel and feature thick 3/8" flanges. They are completely TIG welded and also feature seamless mandrel bends. Tube diameter of 2.25" matches up perfectly with aftermarket exhausts like Borla, Injen, and Nismo. They retain the factory oxygen sensor mount and WILL NOT THROW A CHECK ENGINE LIGHT when run. These pipes will definitely make your exhaust note more aggressive. They have also tended to add a "raspy" exhaust note through the 3-4k range. This note has been loved by some, and hated by others, so it is not for the conservative. They use all factory mounting points and there is no modification to the vehicle. These will work with either aftermarket headers, factory headers, aftermarket exhaust, or factory exhaust. **please note that these replace your factory converters with straight pipes which will not pass SMOG! These are for off-road use only**

NTK Oxygen Sensors meet OE specifications for form, fit and function and have a direct-fit, OEM-style connector for installation. Most Emissions products are available for in-store pickup from Advance Auto Parts.