Tools in Electrical ToolTopia.com Building Supplies - Product Search

Also known as: KD 124, KD124, KDT-124, KDT124; Features and Benefits: Use to bypass ignition switch on any engine with solenoid starter switch Lets you crank engine while working on engine compartment 44" long leads. Heavy-Duty construction Connect from positive terminal of battery to energizing terminal of solenoid Use for generator, starter, and electrical tests, setting ignition points, fuel pump test, adjusting tappets and compression testsWorking under the hood alone and you need to crank over the engine while watching the engine can be an excise in futility, until you get this remote starter switch.  Connected to the starter solenoid, this switch allows you crank the engine without starting from a safe yet visible position nearby.

Also known as: SGT-28100, SGT28100, TA 28100, TA28100; Features and Benefits: For 6, 12, and 24 volt systems Insulated probe has an exposed length of 3-3/8" Includes Protect-A-Terminal®, Probe Adapter to prevent damage to electrical connectors Has 6’ of heavy duty, 18 gage dual leads with large battery clips for easy hook-up Can be used as a standard, single lead circuit testerOur most computer safe circuit tester! High impedance - the current draw is less than 7 milliamps to protect all vehicle circuits including computerized engine and body controls, sensitive electronic sensors, microprocessors, electronic ignition components and air bags. A dual color LED indicates red for power (high) and green for ground (low). Leads can be attached regardless of polarity. Instructions included.

Also known as: SGT-28000, SGT28000, TA 28000, TA28000; Features and Benefits: Tests high and low voltages (power and ground) on 6, 12 and 24 volt systems. High impedance; current draw less than 18 milliamps to protect sensitive electronic sensors, microprocessors, electronic ignition components and air bags Dual color LED indicates red for power (high) and green for ground (low) 6’ of heavy duty, 18 gauge dual leads with large battery clips for easy hook-up Leads can be attached regardless of polarityA modern circuit tester with time tested durability. Quickly and safely tests high and low voltages (power and ground) on all vehicle circuits, including computerized engine and body controls. Extra long, 7" insulated probe tests hard-to-reach circuits. Includes Protect-A-Terminal®, probe adapter to prevent damage to electrical connectors. Can be used as a standard, single lead circuit tester. Instructions included.

Also known as: KTI03921; TOGGLE SW 12V 20AMP ON/OFF WIT

Also known as: KTI70210; Features and Benefits: 500 AMP adjustable load carbon pile Tests 12V batteries rated as high as 1000 CCA or 160 AMP hour 15 second test with audible tone Large, color-coded dual meters Can also test alternators, regulators and startersKTI’s 500 AMP carbon pile load tester is great for simulating actual cranking loads. It tests 12 volt batteries rated as high as 1000 CCA or 160 Amp hour. Quick 15 second test cycle with audible tone to indicate test completion. Unit can also test alternators, regulators and starters. Carbon pile load tester featuers 500 Amp side clamps and heavy-duty stranded copper cables. The large, color-coded dual meters make the unit easy-to-use. Also includes temperature compensation chart. One-year warranty.

Also known as: KTI03923; TOGGLE SWITCH 12V 16AMP

Also known as: ATD-5950, ATD5950; Max continuous power: 200W Peak load power rate: up to 400W For use with 12 Volt systems No load current draw: up to 0.3 Amps Waveform: modified sine wave Input DC voltage range: DC 11V-15V Overload and short-circuit protection (1) Replaceable 20 Amp fuse Built-in cooling fan (2) 110V AC 3 prong grounded receptacles Overload indicator 14 AWG 24” cigarette plug cable (Black, Red) with battery clamp included

Also known as: ATD-5490, ATD5490; Automatic battery size selection- NO need to input CCA, SAE, ICE, EN, ETC Uses conductance technology for safe, reliable testing Battery condition is shown in % of capacity Tests 12-Volt batteries- both flooded lead acid & AGM style Tests discharged batteries Tests 12-Volt starting and charging systems Multi-colored bar graph displays battery condition Low-voltage indicator LED lights shows when battery charging is necessary Bad cells are detected and displayed Reverse polarity protection Patented circuitry MADE IN U.S.A.

Also known as: ATD-5922, ATD5922; 1, 700 Peak Amps 700 Cranking Amps Long 43” Heavy Duty Copper Cables Built-In Charger with Overcharge Protection Integrated Work Light 12 Volt, 22Ah Heavy Duty Sealed AGM Battery Provides 1, 700 Peak Amps & 700 Cranking Amps of Power Built-In Intelligent Charger with Overcharge Protection Can Be Charged With Included 110V Household Cord Or 12V Vehicle Cigarette Lighter Adapter Cord DC Outlet with Overload Protection to Power or Recharge 12V Electronics Long 43” Heavy Duty 100% Copper Cables With 500 Amp Rubber Insulated Clamps Remain Flexible In Extreme Cold Temperatures Color-Coded Battery Status Gauge Convenient On/Off Switch For Safety Heavy Duty Impact Resistant Polyethylene Case

Also known as: ATD-5954, ATD5954; Max continuous power: 1500W Peak load power rate: up to 3000W For use with 12 Volt systems No load current draw: up to 1 Amp Input DC voltage range: DC 10V-15V Overload and short-circuit protection (6) Replaceable 30 Amp fuses Built-in cooling fan (2) 110V AC 3 prong grounded receptacles Overload indicator 4 AWG 24 cable (Black, Red) with battery clamp included

Also known as: ATD-5955, ATD5955; Max continuous power: 2000W Peak load power rate: up to 4000W For use with 12 Volt systems No load current draw: up to 1.2 Amps Waveform: modified sine wave Input DC voltage range: DC 10V-15V Overload and short-circuit protection (8) Replaceable 30 Amp fuses Built-in cooling fan (2) 110V AC 3 prong grounded receptacles Overload indicator Cordless remote control

Also known as: ATD-5951, ATD5951; Max continuous power: 400W Peak load power rate: up to 800W For use with 12 Volt systems No load current draw: up to 0.5 Amps Input DC voltage range: DC 10V-15V Overload and short-circuit protection (1) Replaceable 40 Amp fuse Built-in cooling fan (2) 110V AC 3 prong grounded receptacles Overload indicator 14 AWG 24 cigarette plug cable (Black, Red) with battery clamp included

Also known as: OTC-5019A, OTC5019A; The 8-1/4" low height is perfect for aerodynamic trucks with low ground clearance. Special mounting adapter (No. 220492) fits popular Eaton Fuller RoadRanger transmissions used on nearly all Class 7 and 8 heavy-duty trucks. Mounting plate angle is adjusted with the turn of a wrench. Degree of tilt: 20 back, 15 forward, 12 side to side. Swiveling pump handle permits ease of operation in restricted working spaces. Fast-acting pump quickly raises lifting arm. Weight: 330 lbs.

Also known as: ATD-5495, ATD5495; Fixed load of 125 Amps Tests 6 & 12-volt batteries 300 to 1000 Cold Cranking Amps Test for excessive starter draw Tests 6 & 12-volt charging systems Automatically turns off the load after10 sec. and locks the voltage