Sprinklers Risers Garden - Product Search

The 430R rotor from Irritrol offers everything you would expect from a 1/2" rotor. When your application calls for more than ordinary sprayheads, but not enough for large rotors, Irritrol offers the 430R, the newest member of the Irritrol family. With a familiar arc setting and the ability to quick check the left and right stops, the 430R is sure to save time on installation. The most popular 1.5 GPM nozzle comes pre-installed from the factory. A nozzle tree consisting of five additional nozzles is provided with each rotor. Applications: Residential, Light Commercial familiar Top adjustment , wet or dry For fast convenient installation. REVERSI NG Full- and part-circle OPERA TION Allows you to adjust the rotor from 40 to 360 Pressure-activated wiper seal Reduces flow-by at pop-up and eliminates leaking. Ideal for low flow applications. Stainless steel adjustment screw Allows up to 25% radius reduction Ratcheting riser For easy arc adjustment ½ inlet Covers smaller radius requirements Includes nozzle strip

Shop for Plumbing at The Home Depot. Water your flowers and small plants with the Rain Bird Plastic Flower Bubbler. This durable, corrosion-resistant plastic bubbler sprays 1 - 3 ft. from an adjustable full-circle water spray. Rain Bird 1300 Series Flower Bubblers provide a controlled, gentle umbrella of water for irrigating trees, flowers and shrub areas. A filter screen is included. Discharges 1.4 gpm at 20 psi; Mount these bubblers on 1/2 in. male risers to effectively water areas from 1 ft. to 3 ft.

This Hunter I-60 ADS Sprinker is, NEW from our surplus stock. Model I-60 ADS-Adjustable arc (40-360deg) ADS-Adjustable w/check valve & Stainless Steel Riser Dimensions: Pop-up Height: 3" Overall Height: 8-3/8" Female inlet: 1" NPT or BSP Exposed diameter: 1-3/4" Operating Specs. Discharge rate: 6.5 to 20.4 GPM Radius: 50 to 66' Recommended Pressure Range: 40 to 60 PSI Operating Pressure Range: 20 to 100 PSI Precipitation rates: Approximately 0.29" to 0.52" per hour Nozzle trajectory: 25 deg Includes #462373 Nozzle Pack Total 6 nozzles These nozzles retail for around $80-$90 .

The orbit 1/2-inch by 1/4-inch fpt shrub adapter connects to standard 1/2-inch riser one outlet for a 10-inch-32-inch threaded low volume sprinkler. It’s design makes for fast and easy installation. The conversion to a low-volume sprinkler makes it ideal for watering shrubs and other small plants.

Gently, efficiently waters up to 600 sf. Adjustable sprinkler heads in three spray patterns. Saves up to 50% water compared to conventional sprinklers. All parts included for a complete installation. Expandable. Contents: 75ft 1/2in poly hose, 100ft 1/4in tubing, 2 1/2in hose end clamps, 1 1/2in compression tee, 1 1/2in compression coupling, 11 1/4in barbed connectors, 1 1/2in compression elbow, 1 3/4in swivel adaptor, 25psi pre-set pipe pressure regulators, 1 filter washer, 1 3/4in hose/pipe anti-syphon, 1 hole punch, 10 hole plugs, 1 3/4in pipe coupling, 2 full circle adjustable sprinkler heads, 4 half circle adjustable spray heads, 4 quarter circle adjustable spray heads, 10 8in plastic stakes, 10 4in risers,

The orbit mini rotating sprinkler is an efficient and gentle way to water flower beds. The control knob adjusts water flow and spray distance. It easily threads on a 1/4-inch riser or sprinkler stake.

This is for 1 Brand New Rainbird 20ADJB Full-Circle Impact Sprinkler 1/2" (15/21) riser-mounted impact head used for slope or large, non-turf-area applications. Proven impact drive. Straight-through flow for superior performance in dirty water. Distance-control diffuser pin allows up to 25% radius reduction without changing nozzles. Rugged brass construction. Precipitation Rate: 0.16 to 0.39 inches per hour (4 to 10 mm/h) Radius: 38 to 41 feet (11, 6 to 12, 5 m) Pressure: 30 to 70 psi (2, 1 to 4, 8

The Rain Bird RWS Root Watering System enables vital water, oxygen, and nutrients to bypass compacted soil and directly reach tree and shrub root systems. Its patented basket weave canister allows ground installation to a depth of 36" for the RWS, 18" for the RWS-M and 10" for the RWS-S. This system is intended for use with water dispensing devices, such as a bubbler head or an emitter. This system can be customized by the end user to meet their required irrigation needs or can be purchased with an optional pre-installed 1401 or 1402 bubbler and ACV-050 check valve.RWS-B-1401: Root Watering w/0.25 gpm (1, 2 l/m) bubbler on riser, 4” (10, 2 cm) grate, versatile swing assembly w/1/2” (15/21) M NPT inlet Allows water, oxygen and nutrients to bypass compacted soil and reach root systems directly Encourages roots to grow deep and remain below surface Versatile: Use with drip emitters or bubblers Pre-assembled: Saves valuable time Vandal Resistant: Enclosed design with grate locking feature protects irrigation hardware

Pepco Octa-Bubbler Blue 2 GPH per Outlet Picture Shows Black Octa-Bubbler - You will receive the Blue Octa-Bubbler 2 GPH per Outlet The Octa-Bubbler is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets, it has a 1/2 FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection. The Octa-Bubbler® is ideal for converting sprinkler systems to low flow, because it is designed to apply the amount of water the plants need during the time the sprinkler zone operates. Primary Application: Designed for tree, shrub, flower and ground cover planting beds. This bubbler can be placed on spray head zones. Water is applied in the right quantity where needed with no waste. The Pressure Compensating Diaphragm will deliver relatively uniform distribution of water across a wide pressure range of 20 PSI to 60 PSI. Blue: 2 GPH . All flows are per outlet. Flow control devices are interchangeable. Built-in backfl

"TORO IRRIGATION" 570Z PRO SERIES POP-UP WITH X-FLOW AND FLUSH PLUG * Water Smart® - commercial strength, patented X-Flow water shut-off device built into the sprinker restricts water loss if nozzle is removed or damaged * 4" pop-up height ideal for tall grass and plant areas * Works with any Toro nozzle * Ideal for small lawns or beds, 5' to 15' Features:- * Water Smart® X-Flow Technology : Commercial strength, patented X-Flow® water shut-off device built into sprinkler restricts water loss if the nozzle is removed or damaged. * Flush Plugs : Installed on all bodies, keeps debris out when flushing sprinkler lines. * Stainless Steel Retraction Spring : Professional-grade for reliable pop-up and retraction. * Water Smart : Zero flush - no water loss at system start up. * Superior Seal : Professional-grade seal protects the sprinkler from dirt and debris. * Ratcheting-Riser : For fine-tuning arc adjustment after installation. Specifications:- * Body Diameter : 1 3/8" * Cap Diameter : 2" * Inlet : 1/2" NPT female threaded * Material : Strong, durable ABS plastic * Maximum Operating Pressure : 75 PSI * Recommended Operating Pressure : 30-50 PSI

1 Brand New Nelson Pro 6505 Commercial & Residential Sprinkler Rotor Nelson Pro 6505 Commercial & Residential Sprinkler Rotor normally lists for $34.00 ea. Nelson 6505 Stainless Steel Piston, Anti Drain Valve, Heavy Duty Spring. The Signature 6505 Pro is a 4" Pop-Up, Stainless Steel Riser, Heavy Duty Spring, 40°-360° full and partial-circle arc adjustment, 33'-60' Radius. 1" NPT Inlet The Rotor includes Complete set of Nozzles

Orbit Adjustable Flow 8-Port Drip Manifold for 1/4" Micro Irrigation Tube, 67000 Orbit - Drip Master - MPN 67000 This 67000 8-port manifold has individual flow control on each port so you can easily change water flow to meet your gardens diverse needs. All ports are ¼-inch barbed ports to allow for connection to ¼-inch drip irrigation tubing. The drip manifolds filter is easy to remove and resists clogging. You can easily convert your shrub sprinkler head to a drip watering system with a ½-inch connection to a water sprinkler riser. This drip irrigation manifold is ideal for do-it-yourself micro irrigation system projects. Whether you are creating a new irrigation drip system or repairing or replacing an existing water distribution manifold, you need this Orbit 67000. Features and Benefits Has 8 ¼-inch barbed ports Features flow control for each port

Shop for Sprinkler and Irrigation Supplies at The Home Depot. Mount this shrub spray sprinkler on a 1/2 in. National Pipe Thread (NPT) Riser w

This Toro® sprinkler head has an adjustable spray pattern and a watering radius up to 15 feet. Its adjustable pattern ranges from 0 to 300 degrees for even and complete coverage. This adjustable garden sprinkler head has a maximum working PSI of 30. Excellent for smaller areas of shrubs and gardens, this lawn sprinkler easily attaches to a riser or sprinkler pipe with a threaded inlet. This 570 series shrub head sprinkler works with other brands of lawn irrigation systems. It is easy to install and operate for amazing garden watering coverage. Features and Benefits Adjusts from 0 to 330 degrees Ideal for watering shrub and garden areas Waters areas up to 15 feet in diameter Works with water pressures up to 30 PSI

Pvc risers are constructed of molded schedule 80 pvc and used to connect underground pipe to sprinkler heads.