Random Access Memory (RAM) - Product Search

This document describes ValueRAM s 512M x 72-bit (4GB) DDR3L-1333 CL9 SDRAM (Synchronous DRAM) low voltage registered w/parity 1Rx4 ECC memory module based on eighteen 512M x 4-bit DDR3L-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:. JEDEC standard 1.35V (1.28V 1.45V) and 1.5V (1.425V 1.575V) Power Supply. VDDQ = 1.35V (1.28V 1.45V) and 1.5V (1.425V 1.575V). 667MHz fCK for 1333Mb/sec/pin. 8 independent internal bank. Programmable CAS Latency: 9 8 7 6. Programmable Additive Latency: 0 CL - 2 or CL - 1 clock. Programmable CAS Write Latency(CWL) = 7 (DDR3-1333). 8-bit pre-fetch. Burst Length: 8 (Interleave without any limit sequential with starting address "000 only) 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]. Bi-directional Differential Data Strobe. Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%). On Die Termination using ODT pin. On-DIMM thermal sensor (Grade B). Average Refresh Period 7.8us at lower than TCASE 85°C 3.9us at 85°C < TCASE < 95°C. Asynchronous Reset. PCB: Height 1.180 (30.00mm) double sided component.

Storage Capacity: 6 GB: 3 x 2 GB. Upgrade Type: System specific. Type: DRAM. Technology: DDR3 SDRAM. Form Factor: DIMM 240-pin. Memory Speed: 1333 MHz ( PC3-10600 ). Data Integrity Check: ECC. RAM Features: Single rank unbuffered. Compatible Slots: 3 x memory - DIMM 240-pin.

4GB DDR2 SODIMM Memory kit 667MHz. Guaranteed to work on all dual channel Intel and AMD platforms. World famous Corsair reliability and performance. Package Contents: Two 2GB SODIMM memory module. System Requirements: Designed for use with all SODIMM compatible DDR2 systems.