Tooltopia - Product Search

Also known as: OTC-6591, OTC6591; Features and Benefits: Extreme duty design to handle the heavier springs found on mid- and some full-size truck strut assemblies New frame includes cross bracing at arm mount locations - standard, this eliminates frame flex when compressing heavier springs 2:1 reduction gearbox - standard, allows for a 2:1 torque compression increase when compressing struts Lock rings to hold arms in position - standard, this eliminates arms from spreading or sliding when compressing offset or unique strut configurations Four-point locking jaws securely hold the spring in placeThe Strut Tamer Extreme is a very innovative tools that allows for quick and easy service on strut assemblies. This also includes the ability to handle heavy spring applications. Approved by GM for their 1/2" and 3/4 Ton struts, where competitive units are not approved for these applications. Backed by a limited lifetime warranty. Simply the most effective compressor for virtually any straight, conical, or offset spring. Open-ended design means you can take the strut in and out, quickly and easily. The arms adjust in and out, up and down, to accept many sizes of springs. (2-1/2" to 10" diameter) (2-1/2" to 24" vertical stroke) Other features include: Extra long 3-bar handle gives user the leverage needed to compress heavier strut springs. No need to change shoes for different size springs. Easy to transport when mounted on optional stand (OTC6582). Comes with No. 6583 Bridge accessory to be used on springs that cannot be compressed enough to remove the retaining nut.

Also known as: WHIALUMPLATFORM; Features and Benefits Non-skid feet on each leg provides a secure grip, will not mar expensive, epoxy, garage floors Features sturdy, locking legs and is rated for a 330 pound load capacity Platform width 29-7/8", Depth 11-4/5" Total footprint width 41-3/4" Step height 16-3/8"Aluminum platform is perfect for getting that extra reach when washing RVs, SUVs, trucks and vans, or when extra height is needed for painting or maintenance needs.  Its lightweight 14lbs, which makes it easy to move where needed.  And for easy storage the legs fold underneath the platform.

Also known as: STL14002; Features and Benefits Articulating 185 degree rotating head COntains 4 LEDs with 4 levels of output intensities for each LED Waterproof, durable, lightweight flashlight built to MIL-STD-810F, method 512.4 Long run times - up to 100+ hours at low intensity Easy to use switch for on-off, dimming and mode selection functionsTactical flashlight with 185 degree rotating head. Features 1 each White, Red, Blue and Green LEDs. Each LED provides 4 levels of output intensities: Low (5%), Medium (20%), Medium-High (50%) and High (100%) plus a Strobe function (100%). Pull and rotate locking color selector knob with tactile indicator allows for easy operation with gloves. Constructed of high impact, super tough nylon that is o-ring sealed for waterproof operation (meets MIL-STD-810F, Method 512.4) and contains an unbreakable, gasket sealed polycarbonate lens with scratch resistant coating. Includes cord attachment hole that supports up to 25 lbs, tethered tailcap to prevent loss, spring steel clip that attaches to MOLLE or belt and (2) "AA" alkaline batteries. Coyote Tan color.

Also known as: ROB-16380, ROB16380; UV Leak DetectionRobinairs ultraviolet leak detection kit helps you find leaks fast, because you can actually see the leak. You dont have falsetriggering or background contamination to contend with, as you do with other types of detectors. The dye combines with the refrigerantlubricant and migrates out at the leak, where it is illuminated in the beam of the UV light. UV leak detection can be used for both automotive and HVAC-Rsystems, and dyes wont harm the system. High intensity beam makes even small leaks visible and is bright enough to be used in daylight. Rugged case and a shock-absorbing mounting mechanism protect the lamp during use and storage. UV bulb is rated for 3000 hours and is economical to replace. Comes with a 15’ (4.57 m) long cord with battery clips for automotive use or with a transformer for 115V operation, doing away with heavy batteries and the need to recharge. Designed with super luminescence, so leaks are easy to spot, even small ones. Wont affect the viscosity of refrigerant lubricants and is safe for the entire A/C system. Speeds service, since theres no need to recover the charge, add dye, and recharge, as with some other brands.No. 16380 UV leak detection kit includes: Cordless/rechargeable true UV LED light. Six 1/4 oz. dye cartridges (No. 16357). UV enhancing glasses, dye cleaner. Injection gun with R-134a hose & R-12 adapter.

Also known as: UNRUR700QVAC, URM-UR700QVAC; Two operators can work at same time - each hose is 16 ft, power cord is 20 ft. Automatic Switch: ON / OFF control at sander automatically turns vacuum on and off. Manual: Turns Vacuum on and off, manual override. Motor: Select single or dual (2) vacuum motors, single = 1, 000 W and dual =2, 000 W. Maximum decibel rating at 2, 000 W is 70 db. Variable Power: Power consumption and sound can be reduced at each motor setting when maximum power is not required. Electrical Outlet Voltage: 120 V. 60 Hz. for UR700QVAC Stainless steel drum construction (12 Gal, 47 L) capacity. Vacuum Pressure: 99 inH2O Dimensions: 41” h x 31” w x 21” d Weight: 66 lb / 30 kg

Also known as: ACCVT30, ATQ-VT30; The VT30 is a powerful and compact TPMS tool for all car manufacturers smart tire pressure devices. It activates and decodes all current and future sensors. Its compact size makes it the ideal TPMS maintenance tool. With its USB port this tool is compatible with future sensors (Internet upgrade). Universal TPMS tool. Triggers all currently known sensors 9 V Alkaline battery Compatible with future sensors. (Internet upgrade) Supplied with a protective holster Large LCD display Car manufacturer on-screen selection for faster recognition 9 V NiMh charger (option)

Features and Benefits: Designed to retrieve Enhanced and Transmission diagnostic codes in all OBD2 (1996 and newer) and some of the most popular OBD1 (1981 to 1995) vehicles Displays, records and plays back OBD2 live data graphing on the tool Displays Freeze Frame Data that displays a multiple P.I.D. snapshot of the vehicles condition when the code was set Comes with access to pro.Innova.com RepairSolutions which gives trouble code definitions, a full diagnostic report, probable causes, recall info, TSB’s, most likely fix to DTC’s and more A dedicated all ASE bi-lingual toll free technical support line Mon-Sat, 6am – 6pm, PST All-in-one backlit display that shows over 20 pieces of vital diagnostic information at any one time. Links to all OBD2 protocols including C.A.N. to decode “Check Engine” light problems. Automatic refresh updates data every 30 seconds when connected to the vehicle – an easy way to verify repair completion. Features unique patented all-in-one backlit screen display and 3 color LED display for quick State Emissions readiness check. Comes with 15 inspection maintenance monitor coverage which is a great way to verify repairs have been completed and the vehicle has run through its complete drive cycle. Shows generic (P0, P2, P3, and U0) manufacturer specific (P1, P3, and U1), global, pending and permanent codes as well as the code which caused the freeze frame data to be set. Fully internet updatable and upgradeable for future year, make and model coverage. Memory / Battery backup for off-car review and analysis. Comes with professional shop software to print and manage vehicle diagnostic reports for customer use and keep track of all previous vehicle repairs. Comes with a full one year warranty OBD1 Coverage: • General Motors – 1982 to 1993 and some 1994 to 1995 models • Ford, Lincoln, Mercury – 1983 to 1995 models with EEC-IV Systems • Performs: KOEO, KOER, Timing Check, Cylinder Balance Test, Output State Test, Wiggle Test • Toyota / Lexus – 1991 to 1995 • Honda 1991-1995 • Chrysler / Dodge / Plymouth – 1984 to 1995 • Jeep – 1993 to 1995

Also known as: MPI-889013, MPS-889013, NXQ889013; The Bendix ABS software application provides the capability to test and diagnose vehicles using EC-16, EC-17, EC-30, EC-60 (i.e., ABS 6), EC-30T and EC-60T (i.e., TABS 6) Bendix systems. With the combined power of the easy-to-use Pro-Link iQ™ and the functionality of the Bendix ABS software application, service bay technicians experience unprecedented, out-of-the-box productivity. Easy to use Portable No interface cable setup Read Fault Codes Clear Fault Codes View Brake Data Diagnostice Tests EC-60 Test Inputs Test Outputs Valve Cycle Tests Write TSC1 Torque Limit Sensor Sequence Test Load Battery Voltage Test Rest ECU EC-60T Modulator Sequence Test Test Modulators Warning Lamp Test Reset ECU EC-30 Test ATC Valve Traction Control Enable/Disable Pulse Modulators (Manual) Modulator Sequence Test Test Modulators Retarder Relay Lamp Test (ABS, ATC warning) ECU LED Test Sensor Sequence Test Load Battery Voltage Test Self Configuration Rest ECU

Also known as: SDW-100, SDW100; Many people find it convenient to use Sidewinder processing bags in their waste management programs. You must still use a bucket if you choose to use Sidewinder processing bags. Just place the Sidewinder processing bag in a clean open top metal bucket and fold down the sides like lining a waste can. For best results when using Sidewinder processing bags, start with a clean open top metal bucket, bags will stick to dirty buckets containing paint or coatings residue.

Also known as: RFX-7121101, RFX7121101; The RapidFix Professional Adhesive bonds most materials instantly. These materials are rubber, glass, copper, aluminum, steel and most plastics. The RapidFix Welding Powder is used to repair all types of holes, cracks, gaps and can produce a strong weld seam to support the repair, just like solder or welded joints. The RapidFix Dual Adhesive Systemhas a wide range of applications. It can bond almost any material to itself or to another material. High strength–bonds in seconds Will not dry out in the container Bonds instantly to most materials RapidFix can be filed, ground, drilled and painted instantly RapidFix Adhesivedries crystal clear

Also known as: EPI3140, EQS3140, INN-3140; Features and Benefits Provides SAE enhanced Live Data - views, records, and plays back live PCM data streams Designed to retrieve diagnostic codes in all OBD2 (1996 and newer) and some of the most popular OBD1 (1981 to 1995) vehicles OBD1 (82-95) Coverage GM, Ford, Chrysler/Jeep and Toyota/Lexus Communicates with all OBD 2 protocols: C.A.N. (Controller Area Network), ISO 9141, J1850PWM, J1850VPW, KWP 2000 ISO 14230-4 Displays Freeze Frame Data The Equus line of scan tools provide the most diagnostic data and power for the money than any other line of scan tools!  It’s patented "All-in-One" display shows 25 vital pieces of information at one time, and all within 15 seconds.  The 3140 can diagnose all OBD II compliant vehicle and most OBD I vehicles as well. This feature-packed tool and software kit is designed to meet the needs of professional technicians who desire quick and easy access to diagnostic data essentials for a wide range of vehicles.  Features unique patented all-in-one screen display and LED display for quick emissions check.  Includes Spanish and French Interface and Definitions (selected by a menu command).  Retrieves OBD2 DTCs: Generic Codes (P0, P2, P3, and U0 B0, and C0) / Manufacturer Specific Codes (P1, P3, and U1).  Unit can be flash updated with a standard Windows® PC (OBD-PC Link™ software required / included with tool).  Memory / Battery backup for off-car review and analysis.OBD1 Coverage: General Motors - 1982 to 1993 and some 1994 to 1995 models excludes Saturn vehicles; Ford, Lincoln, Mercury - 1983 to 1995 models with EEC-IV SystemsPerforms: KOEO, KOER, Timing Check, Cylinder Balance Test, Output State Test, Wiggle Test; Toyota / Lexus - 1991 to 1995.Most models Chrysler / Dodge / Plymouth/Jeep - 1984 to 1995. Diesel trucks 1992-1995

Leak Detection System that locates EVAP, vacuum, exhaust and other leaks with Diagnostic Smoke® & UV dye trace Work with shop air or inert gas except the WV522B which turns shop air into inert gas 2-Year Warranty (WV522B 2nd year offered for a fee) 2 Bottles of UltraTraceUV® Smoke Solution, good for hundreds of tests For safety and OEM required, when a Vacutec turns off so does the flow into the system being tested 5 Minute automatic shut-off timer Will not overpressure an EVAP or any other system Test with or without smoke

Also known as: STL-85010, STL85010; Features and Benefits: C4 LED is 2 times brighter than a Super high-flux LED, delivers 120 lumens LED is impervious to shock and never needs replaced Rubber armored sleeve provides a "sure-grip" in all weather environments Anti roll head keeps the light in place Easy to use push button tail "on-off" switchingThis compact, machined aluminum flashlight is one of the brightest, lightest personal flashlights ever created. Up to 3.5 hours runtime to the 10% output level. Up to 7, 500 peak beam candlepower. Powered by two 3 volt lithium energy cells, LED has a 50, 000 hour lifetime and never needs replaced. O-ring sealing protects against moisture. Length: 5.72"; weight: 5.3 oz. Limited lifetime warranty.

Also known as: STL75194; Features and Benefits Distinctive Orange color easy to find among tools Rechargeable flashlight saves user money on battery replacement costs (STL75194 does not contain chargers or charge cords) Focusable, powerful Xenon bulb allows user to adjust lighting to task at hand Durable, machined aluminum construction ideal for shop/work environment Knurled grip and easy to use push button switchingRechargeable flashlight featuring a powerful Xenon bulb. Machined aluminum construction with push button switching and an unbreakable polycarbonate lens. Xenon bulb is focusable and produces up to 15, 000 candlepower. Up to 1 hour of continous use between charges. Battery is rechargeable up to 1000 times. Orange. Part STL75194 does not contain chargers or charge cords. Contains light and battery only. UL listed.

Also known as: STL-90633, STL90633; Designed to put light where you need it, the Knucklehead is the mostversatile light you’ll ever own.Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood patternShockproof dual C4® premium LED technology delivers 200 lumens4 modes: High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hourruntime; Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime;Moonlight – 20 day runtime; Flash – 8 hour runtimeDual power source: accepts rechargeable NiCd battery pack or 4 "AA" alkaline batteriesRubber dome push-button actuator is easy to operate even when wearing heavy glovesRemovable magnet with 135 lb pull strength features a replaceable rubber bootOptimized electronics provide regulated intensityHigh-impact, super-tough nylon polymer construction for execptional durabilityIPX4 rated for water-resistance9.2 in.; NiCd 23.1 oz; Alkaline 18.3 oz

Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds) 10, 000 _F capacitance range New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments Designed to withstand 3 meter drop (with holster) Hi resolution 20, 000 count display mode True-rms ac voltage and current for accurate measurements on non linear signals (28 II) Average responding voltage and current for measurements New – Backlit keypad buttons allow for easy visibility in lowlit areas Large display digits and 2 level bright white backlight for increased visibility Reversible holster for added protection when not in use Withstands hazardous 8, 000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards Long battery life (800 hours) Relative mode to remove test lead resistance from low ohms measurements Auto and manual ranging for maximum flexibility

Also known as: TAETERT919A; Features and Benefits: Manual and Automatic pressurization of the entire cooling system Hand Pump constructed from high impact Polymer Spaced Aged polymer to prevent glycol corrosion Adapters are color coded for easy identification Ideal for any shop or technicians tool box Convenient sotrage caseThe Automatic air inlet pump includes shut off valve, pre-set regulator valve, pressure relief valve, color coded pressure gauge and quick release fittings. Three special adjustable depth seat adapters cover most conventional radiator tank necks. Tank Adapters included: A. #RT919-02 Suits: Audi A4, A5, A6 Tank Thread Size: 52mm x 3mm 2 1/16" x 1/8" internal Tank Size: 32mm 1.1/4" filler necks Top seal Only B. # TR919-03 Suits: Opel, Holen, Camira, VW, Ford. Tank Thread Size: 52mm x 3mm 2 1/16" x 1/8" External C. #RT919-04 Suits: BMW Tank Thread Size: 52mm x 3mm 2 1/16" x 1/8"Internal & 63mm x 3mm 2 7/16" x 1/8" External E. #RT919-05 Suits: Volvo, Citreon, Renault, Peugeot Tank Thread Size: 1 3/4" x 1/8" 45mm x 3mm External F.#RT919-06 Suits: Audi, Porsche, VW Tank Thread Size: 1 3/4" x 1/8" 45mm x 3mm External G. #RT919-08 Bridge for adjustable seats: 1 1/16" 27mm, 1 3/8" 35mm, 2" 50mm H. #RT919-09 2" 50mm Adjustable Seat for use with #RT919-08 Adjustable Bridge for all necks from 50mm 2" and up. I. #RT919-10 1 3/8" 35mm adjustable seat for use with #RT919-08 adjustable bridge for all necks from 1 3/8" 35mm and up. J. 1 1/16" 27mm Adjustable Seat for use with #RT919-08 adjustable bridge for all necks from 1 1/16" 27mm and up. K. #RT919-12 1 3/16" 31mm Tank Adapter Suits: Toyota, Lexus, and many late model Asian vehicles Tank Size: 1 3/16" x 13/32" 31mm x 10mm reach filler necks use with #RT919-08 bridge L. #RT919-13 1 1/4" 32mm Tank Adapter Suits: Toyota, Subaru, Nissan, Mitsubishi and Honda Tank size: 1 1/4" 32mm filler necks Top Seal Only M. #RT919-41 Suits: Toyota, Lexus, Honda & many late model Asian Vehicles Tank Thread Size: 31mm x 10mm 1 1/4" x 13/32" filler neck, N #RT919-43 Radiator Tank Adapter Suits: Toyota, Subaru, Nissan, Mitsubishi and Honda Tank Size: 32mm x 16mm 1 1/4" x 5/8" filler necks.

Also known as: OTC-6521, OTC6521; Features and Benefits Easy, effective, versatile tool to help technicians diagnose EVAP trouble codes on domestic and import cars and light trucks Uses patented UltraTraceUV™ technology — the only OEM-approved dye available Works with nitrogen or shop air to meet all OEM test requirements Uses existing OTC LeakTamer accessories Auto-correct EVAP pressure - No user adjustment neededLeak Tamer™ Plus uses patented Ultra-TraceUV™ dye…the only OEM-approved dye. No manual flow valve, turns off automatically. Safely stops gas fumes from entering work bay. Auto-correct EVAP pressure…no user adjustment. Avoids damage to vehicle. Works with nitrogen or shop air to meet all OEM test requirements for all makes and models.  Uses OEM-Approved Technology.  This technology was developed in collaboration with Ford Motor Company, GM, and Daimler Chrysler to specifically test a vehicle’s EVAP system and to meet major automakers’ EVAP testing specifications and needs. The LeakTamer™ Plus EVAP Model 6521 is EVAP-approved. Accessories Included with No. 6521 No. CEA-01 - 3 1/2" Diameter Exhaust Cone No. CEA-02 - Assorted Cap Plug Kit No. CEA-04 - Standard Service Port Adapter No. CEA-049 - Dual Size Schrader Removal Tool No. HS-400AC - 400, 000 CP Spotlight with 20 foot Cord and Battery Clips.

Also known as: TAETECR00A; Features and Benefits: A full kit for most makes or model motorcycle repair jobs Durable Box for to keep and carry parts together for onsite or travel conveniently to  location Make any job easier with a full set of parts needed at your finger tips Replacements parts available 1 Year warrantyKit includes: CR001 Crank case Installer (10x1.25, 12x1.25mm nuts), CR002 Drive Chain Breaker (3-22mm) pin Dia. 3.5-6mm, CR003 Universal Flywheel/ Clutch Holding Tool, CR004 Magneto Flywheel Puller 28x1.0mm (r-hand), CR005 Magneto Flywheel Puller 1-1/16" 27x1.0mm (l-hand), CR006 Magneto Flywheel Puller 15/16" 24x1.0mm (r-hand), CR007 Magneto Flywheel Puller 5/8" 16x1.5mm (r-hand), CR008 Magneto Flywheel Puller 9/16" 14x1.5mm (r- hand), CR009 Speedometer Front Wheel Gear Nut Socket, CR010 3pc. Tappet Adjusting Tool (8 and 9 mm), CR011 Clutch Nut Socket (22mmdis. 4 Pins), CR012 Clutch Nut Socket (23mm dia. 4Pins), CR013 Valve Spring Collet Remover / Replacer, CR014 D/Ended Steering Lug Nut Hook Wrench, CR015 Screwdriver with ¼” Hex Bit Holder, CR016 “T” Handle with ¼” Hex Bit Holder, CR017 10mmx ¼” Hex x 4" 100mm Deep Socket, CR018 8mmx ¼” Hex x 4" 100mm Deep Socket, CR019 ½” SQ. Drive x ¼” Hex Bit Holder, CR020 #2 Phillips x 6mm Slotted x 4" 100mm ¼” Hex Bit, CR021 #3 Phillips D/End x 100mm ¼” Hex Bit, CR022 5mm, 6mm Hex D/End x 4" 100mm ¼” Hex Bit, CR023 4mm, 5mm Hex D/End x 8" 200mm ¼” Hex Bit, CR024 #2 Phillips D/End x 8" 200mm ¼” Hex Bit, CR025 #3 Phillips D/End x 12" 300mm ¼” Hex Bit.Made in Taiwan.

Also known as: ATD-5585, ATD5585; Highest quality auto-ranging DMM designed for automotive trouble shooting. Features Peak MIN/MAX records transient voltages as fast as 1 millisecond. Milliseconds pulse width measures fuel injector on-time. Also measures temperature via Temp Probe in both F & C and a desirable 20 Amp test range. Unit has dual fuse protection, modern design and protective holster built into the housing. Instruction manual and molded storage case included Features: 48 Test Ranges 18 Test Function rpm for DIS & standard ignitions Data hold, auto power-off and trigger adjusts Test Leads Large LCD Display with White LED Backlighting 40 Segment Analog Bar Graph Min/Max Mode Records Variation in All Functions K-Type Temp Probe Inductive rpm clamp

Also known as: KEN-35939, KEN35939; Features and Benefits: Hits harder and straighter than a hammer No more misses or glancing blows Two easily interchangeable hardened steel forks (included) Services compact carts and light duty trucks too Made in U.S.A. Heavy-duty impact front end service tool. Use the T38B-1 fork to separate shock absorber links and tie rods.  Use the T39B-2 fork on spindle support arms to remove ball joints without damaging other suspension parts. Includes impact separator tool with 2 forks: 35939-01 (T39B-1) Tie Rod Fork, Fork Opening: 5/8"; 35939-02 (T39B-2) Ball Joint Fork, Fork Opening: 15/16".

Also known as: NCT5020; Features and Benefits: Proprietary pneumatic planishing cylinder - Made in U.S.A. Heavy duty rectangular structural steel tubing frame Fully welded construction Adjustable cylinder up to 3000 BPM’s Five lower anvils included The Planishing Hammer frame is constructed of 3" x 2" x .250" wall rectangular steel tubing, triple gusseted to prevent deflection or movement with continuous welds at every joint to provide strength and rigidity. While most planishing hammers use a riveting type hammer, this unit uses a specially designed American made reciprocating cylinder manufactured exclusively for planishing (patent pending), operating on standard shop air with thumbscrew control.(optional foot pedal also available) The conveniently located adjustable flow control valve provides the proper BPM needed to achieve excellent results while crowning, shrinking, flattening or forming. The adjustable yoke can be adjusted and locked, to accommodate any material thickness, on a precision acme thread lead screw with a comfortable hand wheel. Unit is equipped complete with hardened steel hammer head and five forming dies (Crowning, Shrinking, Flattening and two (2) Forming). Combine this unit with the Universal Base (NCT5010) for a solid and stable foundation which is critical during planishing and forming. Made completely in USA and carries a two-year manufacturer’s defect warranty.

Also known as: ROB-14777, ROB14777; Compact Electronic Vacuum GaugeRobinairs 14777 electronic vacuum gauge is just 2-1/2" x 3" in size, but accurate enough to clearly indicate when the system isfree from moisture and ready for recharging. Specifically designed for use with a high vacuum pump, the 14777 measures to 10 microns. The digital display reads in ranges beginning with 20, 000 microns. As the vacuum pump continues to pull down, the instrument registers in ever smaller segments from 1000s of microns to segments of 500s to 50s. The ultimate reading is 10 microns.Clearly Shows Vacuum Level The display is an easy-to-read LCD type with readout showing the current vacuum level.6’ Lead for Service Flexibility A thermistor measuring vacuum level is attached to a 6’ long lead that plugs into the instrument. You can hang the gauge in a location thats convenient for you to monitor vacuum level. Because the thermistor with lead is removable from the unit, it can be easily replaced, if necessary.Mounting Magnet Use the heavy-duty magnetic strip on the back of the unit to attach it to the A/C or refrigeration unit. You can position the 14777 where its easy to read the LCD.Hassle-Free OperationThe 14777 is simple to use just connect the thermistor lead to an access port on the system or off the inlet tee on the vacuum pump. Press the on/off button, then start the vacuum pump. For large systems, you can save battery life by running the pump for a few minutes, then turning the vacuum gaugeon all it takes is the push of a button.No. 14777 Compact electronic vacuum gauge.SpecificationsPower Supply ................................................................One 9V battery (included)Vacuum Fitting ........................................................................................ 1/4" MFLLength of Lead ..................................................................................6 feet (8.3 m)Vacuum Rating ........................................................................................29 in./HgDimensions ............................................................................3" H x 2.5" W x 1" D................................................................................(7.62 cm x 6.35 cm x 2.54 cm)

Also known as: FLK-113, FLU113; VCHEK LoZ low impedance measurement function to simultaneously test for voltage and continuity True-rms for accurate ac measurements on non-linear loads A large backlit display allows for easy visibility in low-lit areas Record signal fluctuations using the Min/Max function Diode test for testing general-purpose germanium, silicon, and power diodes Integral holster with probe holders for easy storage Auto and Manual ranging for added user functionality Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety The optional TPAK magnetic hanger allows the user hands-free flexibility

Also known as: OTC-6575, OTC6575; The Hub Grappler Kit is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This eliminates unnecessary alignments or the use of a shop press, cutting service time dramatically. The new Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time. The new jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners. The new 3/4” custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5-10 times longer than similar designs.

Motor Guard is pleased to present the latest item in their comprehensive line of autobody repair and refinishing products. The Magna-Stitcher™ from Motor Guard provides an economical solution for plastic repair by turning your stud welder into a plastic repair tool. The Magna Stitcher™ fits all popular stud welders and provides all the features of a plastic repair system at a fraction of the cost. The MS-1 works by welding a rigid stainless steel stake into the surface of the plastic resulting in a permanent repair of the crack. Repairs can be made on flat surfaces, tabs, holes, ribs, inside and outside corners. Each Magna Stitcher Kit contains: (1) Magna Stitcher Adapter (25) S Shaped Stakes for Flat Surface Repair (MS2004) (25) M Shaped Stakes for Tabs and Narrow Sections (MS2005) (25) V Shaped Stakes for Inside Corner Repair (MS2006) (25) W Shaped Stakes for Outside Corner Repair (MS2007) (1) Handy and Durable Storage Case

Also known as: TEK-703512, TEK703512; Slicker clears, superior metallic control, better blends Even material distribution for fewer coats, increased productivity High transfer efficiency - saves materials, saves money Digital gauge for accuracy and repeatability Waterborne compatible Includes: TEKNA® Copper HE Gravity Gun/Cup (1.2, 1.3mm - 7E7) CVi® Uncupped Gravity Gun (1.2, 1.3mm - #510 & #505) (2) HAV-555 - Digital Gauges w/ Air Adj. Valves DeKups® Demo Kit Professional Spray Gun Cleaning Kit