Battery Powered Tooltopia - Product Search

Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds) 10, 000 _F capacitance range New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments Designed to withstand 3 meter drop (with holster) Hi resolution 20, 000 count display mode True-rms ac voltage and current for accurate measurements on non linear signals (28 II) Average responding voltage and current for measurements New – Backlit keypad buttons allow for easy visibility in lowlit areas Large display digits and 2 level bright white backlight for increased visibility Reversible holster for added protection when not in use Withstands hazardous 8, 000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards Long battery life (800 hours) Relative mode to remove test lead resistance from low ohms measurements Auto and manual ranging for maximum flexibility

Also known as: OTC-3908, OTC3908; OTC AMP Clamp/Multimeter was designed to allow accurate current measurements using clamp jaws. The clamp meter is well suited for testing starting/ charging circuits, and provides easy access to current, voltage and other key automotive measurements, all in one easy to use tool. Duty Cycle Resistance Capacitance Diode Continuity Frequency Temperature Display maximum reading of 4000 counts Range auto/manual Automatic negative polarity indication Automatic zero adjustment Over range indication Low battery symbol Data hold symbol Relative measurement symbol Clamp opening size 32mm Auto power off AC/DC Voltage: 600V AC/DC Current: 1000A Operating Environment Temperature: 32 to 104°F (0°C to 40°C), Humidity: < 80% RH Storage environment temperature: -4 to 140°F (-20°C to 60°C), Humidity: < 90% RH Kit Includes: Test leads, temperature probe, soft carry case, 9-volt battery

Also known as: OTC-3665, OTC3665; Phototach contact/non-contact No. 3665 phototach can be used as a contact as well as a non-contact tachometer. Four styles of contact adapter tips clip easily to the top of the phototach. Infrared technology makes the phototach accurate, convenient, and easy to use. Infrared beam not affected by ambient light. Non-contact design results in (zero) torque loss for true precision. Phototach is equipped with a laser pointer for accurate targeting. Reflective tape placed on a revolving object can be measured at distances from 2" to 20". Wide measuring range and high resolution, 2.5 to 99, 999 rpm with a large 5-digit display, autoranging, min/max memory storage, and low-battery indicator. No. 3665 Phototach contact/non-contact.

Also known as: ESI-595, ESI595; Features and Benefits: 58 Test ranges, 16 functions Auto power-off, saves battery Ms pulse width for fuel injector on-time Minimum / Maximum function captures high/low readings for better diagnostic capability RS-232 PC interfaceThis is a premier automotive diagnostic tool.  It’s equipped with the latest testing capabilities, including milliseconds pulse width, for measuring the on-time of fuel injectors.  This features a huge LCD display w/bar-graph for easy viewing.  It also can be interfaced to your PC or notebook computer for enhanced diagnostics and data presentation.  The software and computer interface cable are included. This set includes two sets of test leads, RPM pick-up, temperature probe, software CD, interface cable, protective holster, 9 volt battery, instruction manual and hard storage case.  Inductive RPM pick-up features a five position adjustable sensitivity switch.Test functions: AC/DC Volts ms-Period AC/DC Amps ms-Pulse Width Ohms Temperature Capacitance Diode test Frequency Continuity Duty cycle

Also known as: FLK-77-4, FLU77-4; Features and Benefits Wide 1000 V measurement range 10 amps continuous Minimum / Maximum to record signal fluctuations Auto and manual ranging Large displayVersatile meter for field service or bench repair, the new FLU77-4 digital multimeter has the features needed to repair most electrical and electronic problems.  This meter is simple to use and has significant improvements over Fluke’s original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view.  Other features include: average responding ac measurments; 0.3% accuracy; frequency and capacitance; resistant and continuity.  Includes backlight for work in dim areas, and an integral holster with probe holders.  Multimeter includes a limited lifetime warranty, test leads, battery and manual.  UL and CSA approved. Meets measurement category 1000 V CAT III and Category IV 600 V safety standards.  Made in USA.

Also known as: ROB-43160, ROB43160; Features and Benefits: Includes profiles for 17 common refrigerants Detects vacuums in Hg Selectable temperature and pressure units of measure Easy to read  LCD screen with large digits Aluminum block constructionCalibrated to measure 17 different refrigerants (R12, R22, R123, R124, R134a, R401A, R401B, R402A, R402B, R404A, R407C, R408A, R409A, R410A, R502, R507, R508B) these accurate gauges allow you to choose the temperature (°F or °C) and pressure units (PSI, bar, kPa and kg/cm3) your most comfortable using. The low side gauge has a pressure scale of 30 inHg VAC to 250 psig and the high side gauge has a pressure scale of 0 to 800 psig. Gauges come with a backlight to enhance the view and make the gauges easy to see in low light conditions.Automatic shutdown after 15 minutes of inactivity. Low battery indicator. Hoses NOT included.

Also known as: TMG01; Features and Benefits: Detachable Polish Dispenser for use on hand held surface finishing power tools Fits on Dewalt, Makita, Milwuakee, Porter Cable and many more Gravity fed impellar motor for use on heavy cut and fine cut polish Lithium Ion Battery comes fully charged and can run 6 gallons of polish on one charge Multiple Tips for different size pads and applicationsThe ThumbGun™ dispenser is firmly attached to rotary polishers by its strap strategically placed to avoid vent holes on the polishers. The thumb-switch activates an electric pump which dispenses liquid polish through nozzle and onto work surface so that the user can easily determine how much and control the amount of polish product that is comsumed. The ThumbGun switch is conveniently located near and above the polisher’s handle. This allows for uninterrupted operation while gripping the polisher by the handle, activating the trigger with the forefinger and using the thumb on the ThumbGun switch. The ThumbGun dispenser is perfect for use on autos, trucks, boats, RV’s and planes.

Also known as: IPA-9003, IPA9003; Features and Benefits: Handheld portable trailer tester Internal battery included with charger 7 spade, 6 round, 4 and 5 pin connections Analog controls, short circuit protection and amperage readout 10lbs, made in USAThe Mini-MUTT® is a compact and portable analog power unit used for testing lights and electric brakes. The internal battery powered mini mutt weighs 10 lbs and eliminates the need for a vehicle when testing trailers. Simply turn the dial to the desired circuit and the Mini-MUTT powers up the trailer lights. The 5 ah internal battery provides enough power to test several trailers before needing a recharge. The Mini-Mutt ® features a 7-spade pin socket and includes an adapter for attaching to 6 round, 4 and 5 pin trailers; the most popular trailers for RV, landscaping, light duty equipment and car hauling. The faceplate of the Mini-Mutt® is user friendly with pin configuration diagrams and easy-to-use instructions.

Also known as: OTC-3870TPR10, OTC3870TPR10; The TPR activation tool links to the scan tool using a wireless communication link for seamless transfer of data! Fast and easy new TPMS sensor I.D> programming on Asian import vehicles, activate the Sensors with the TPR and the scan tool receives the ID’s wirelessly from the TPR activation tool for simple reprogramming. The user interface was greatly simplified for “Tire Pressure Sensor Registration” unifying and simplifying the user interface experience with a single easy process! TPMS Scan function displays TPMS Datastream and DTC values if required. TPMS sensor tire pressure information scanned from the vehicle computer, such as, actual TPMS sensor PSI, temp and battery voltage or you can read directly from the senor using the TPR tool. Reprogram tire size on supported applications. Kit Includes: TPMS scan tool, TPR handheld, DB25 wireless adapter, OBD II Smart cable, carry case, registration card, user manual, and TPMS/TPR scanmate 2010 CD.

Also known as: OTC-3418, OTC3418; Features and Benefits HD J1587 / J1708 and J1939 CAN, Engine, Transmission/ABS coverage and more for diagnostic trouble codes Provides on screen DTC definitions for heavy duty standard codes Applications: Tow trucks, recreational vehicles, cement trucks, dump trucks, garbage trucks, buses, step vans, municipal vehicles, refrigerated trucks, and conventional trucks Battery powered for off vehicle use Internet update capableClass 4 – 8 Heavy Duty Code Reader. Reads and erases Heavy Duty Diagnostic Trouble Codes (DTC’s). Heavy Duty Standard Coverage for J1587 / J1708 Protocol and J1939 CAN Protocol. Coverage also on  Heavy Duty Standard compliant construction, marine, agriculture, and other industrial diesel power plant configurations! HD Reader 3418 Kit Includes: 3 year warranty, HD Reader tool, 9 Pin Deutsch Cable, 6 Pin Deutsch Cable, Operations Manual and soft nylon carrying case.

Also known as: ROB43186; Features and Benefits: Includes profiles for 17 common refrigerants Detects vacuum in "Hg Selectable temperature and pressure units of measure Easy to read LCD screen with large digits Solid aluminum manifold bodyCalibrated to measure 17 different refrigerants (R12, R22, R123, R124, R134a, R401A, R401B, R402A, R402B, R404A, R407C, R408A, R409A, R410A, R502, R507, R508B) these accurate gauges allow you to choose the temperature (°F or °C) and pressure units (PSI, bar, kPa and kg/cm3) your most comfortable using. The low side gauge has a pressure scale of 30 inHg VAC to 250 psig and the high side gauge has a pressure scale of 0 to 800 psig. Gauges come with a backlight to enhance the view and make the gauges easy to see in low light conditions.Automatic shutdown after 15 minutes of inactivity. Low battery indicator.

Also known as: ZNECI-3120, ZNECI3120, ZNXCI3120; Features and Benefits Battery operated, no more cords - the convenience of a cordless tool Unique LED light to help brighten the work area in tight or dark areas Max torque of 45 ft-lbs Hand-ratcheting capable Battery compatible with other 12V toolsA cordless design offers the ability to reach tight spots under the hood, dashboard and undercarriage not normally accessible with an impact wrench.  A hand-ratcheting capability for more stubborn fasteners.  45 ft./lbs. of maximum torque.  LED lighting from the ratchet head that shines on the work area.  An ergonomic paddle switch and a more comfortable rubber grip on the handle.  A stronger direction lever.  A light-alloy housing.  Kit includes: 12V 3/8" drive cordless ratchet with two batteries and quick charger in a blow-mold carrying case.

Also known as: ESI-687, ESI687; With the capability of measuring down to 1 milliamp (.001A), the #687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems. Features:35 Test Ranges 10 Test Functions Auto Power Off Auto-Ranging Data Hold Continuity Beep Overload Protection Clamp opening 5/8 inches 9 Volt Battery Included Carrying Case included TEST RANGES: DC Amps: 0-4A, 80A AC Amps: 0-4A, 80A DC Volts: 0-400mV, 4V, 40V, 400V, 600V AC Volts: 0-400mV, 4V, 40V, 400V, 600V Ohms: 0-400, 4k, 40k, 400k, 4M, 40M Frequency: 0-5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 500kHz, 5MHz, 10MHz Capacitance: 0-40nF, 400nF, 4uF, 40uF, 100uF Duty Cycle: 0-.5%-99.0% Diode: Diode Test Continuity: Audible Beep

Also known as: TCT10C-AC01, TNC10C-AC01; Features and Benefits AC01 is charger only - must be used with a Smart Battery Adapter (AD01, AD02, AD03 or AD04) Universal charger uses patented adapters to charge "ALL" major power tool brands - DeWALT, Makita, Milwaukee, Bosch, Hilti, Hitachi, Panasonic and other major brands Automatic Chemistry and Voltage Detection - Safely detects all battery chemistries and voltages. Operates between 10.8V - 18V Lithium-Ion and 12V to 18V Ni-CD and Ni-MH Longer life - safely extends battery life compared to other chargers Operates in a wide range of temperature extremesPro Charger Single-port charger charges one battery at a time. Switch out adapters to charge different brands of power tools. Adapters for all major brands sold separately. Unprecedented performance, convenience, speed, durability and ease-of-use in charging batteries for cordless power tools. 10C Technologies introduces a battery charging system so innovative, it will revolutionize how professionals recharge their cordless power tools. The all-new Pro Charger from 10C is capable of recharging power tools far more quickly and efficiently than any battery charger available on the market today. All it takes is a simple adapter to recharge any major brand. 10C Technologies has engineered a breakthrough that minimizes heat during the charging process. Users can charge most major brand batteries in 15 minutes or less (Ni-CD), 40 minutes or less (Ni-MH) and 1 hour or less (Li-Ion) and enjoy a significant increase in total battery life. Batteries can be charged in extreme hot or cold conditions where other commercial chargers fail. LED lights flash when battery is charging and stop when battery is fully charged. LED will also indicate when battery life is exhausted and needs to be recycled.  30 Day Risk Free Performance Guarantee - 1 full year on parts and labor.

Also known as: OTC-3990, OTC3990; OTC 1000V CAT III Hybrid Multimeter with Insulation Test. A full function Multimeter with an insulation test feature is used to test for voltage leaks through insulation found on Hybrid and Electric Vehicles. HyBrid Insulation Resistance Test True RMS Auto Ranging Diode Test Continuity Buzzer Data Hold Data Logging Display Backlight Min/Max Mode Sleep Mode Low Battery Display Insulation Testing Voltage: 50V, 100V, 250V, 500V, 1000V AC Voltage: 6V, 60V, 600V, 1000V DC Voltage: 6V, 60V, 600V, 1000V DC Millivolts: 60mV, 600mV AC Current: 60mA, 600mA DC Current: 60mA, 600mA Ohms: 600., 6k., 60k., 600k., 6M., 40M. Capacitance: 10nF, 100nF, 1000nF, 10µF, 100µF Frequency at mV range: 60Hz, 600Hz, 6kHz, 60kHz, 600kHz, 1MHz Frequency at DCV/ACV range: 10Hz ~ 100kHz Temperature: -40C to + 537C (-40F to + 998F) Kit Includes: Heavy Duty Class III test leads with alligator clips, Short Lead, K Type temperature adapter and Manual.

Also known as: ATD-5597, ATD5597; FEATURES: 37 Test ranges 10 Test functions Auto power off Auto-ranging, data hold Continuity beep Overload protection 1.5 clamp opening Temperature probe included 9-Volt battery included Carrying case included TEST RANGES: AC & DC Amps: 0-40A, 400A, 1000A AC & DC Volts: 0-400mV, 4V, 40V, 400V, 600V Ohms: 0-400, 4k, 40k, 400k, 4M, 40M Frequency: 0-5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 100kHz Capacitance: 0-40nF, 400nF, 4uF, 40uF, 100uF Duty Cycle: 0-.5%-99.0% Diode: Diode Test Continuity: Audible Beep Temperature: -4F TO 1832F & -20C TO 1000C A great tool for all around electrical troubleshooting Ideal for all high current applications; especially starting and charging diagnostics Measures up to 1, 000 Amps AC or DC Features built-in degrees F or C temperature readings

Also known as: ATD-3635, ATD3635; Portable scale is ideal for accurate charging Heavy-duty die cast aluminum base Extra large LCD display Measure in pounds or kilograms Low battery warning with auto power-off Includes carrying case and 9V battery Capacity: 220lbs. Accuracy: +/- 0.5% Resolution: 0.5 oz. Operating Temp: 32º to 113º F Battery Life: Up to 30 hours of continuous use Platform Size: 8-3/4” x 8-3/4” Weight: 5lbs.

Features and Benefits 8 Piece Specialty Pliers Set is great for any mechanic Made in America Lifetime Warranty A great versatile crimper/plier set for many applicationsThis 8 Piece Specialty set includes: SKT7702-Up Front Cutter/Stripper Pliers (Up-front cutting/crimping pliers. Strips and crimps 10-22 AWG. 5 bolts cutting stations. Ideal for automotive technicians), ?? SKT7801 Microterminal Crimper (Crimps GM weatherpack terminals. Cushion grips for user comfort. A must for GM and all auto mechanics), SKT7703 Ignition Wire crimping tool (Strips and crimps 10-18 AWG. Also crimps 7-8mm auto "W" and "F" crimp terminals), SKT7698 8" Crimping/Stripping Pliers, SKT15032 Battery Cable Cutter Pliers (Forged battery cable cutter. For use on copper wire only. Capacity 2.0" cable), SKT7621 Brake Rings Pliers (Patented, wedge pliers to spread the "C" ring which holds the emergency brake actuation lever to the brake shoe. Ideal for automotive technicians), SKT7601 Mini Hose Pinch Pliers (3/4" capacity) and SKT7602 Standard Hose Pinch Pliers (1-1/4" capacity).

Also known as: ATD-3699, ATD3699; The ATD 3699 meets the new SAE J2791 standard & is made in the USA to our quality specifications Detects all HFC, HCFC & CFC refrigerants including SNAP blends Long life heated sensor Automatic calibration & reset to ambient levels 3 adjustable sensitivity levels True mechanical pump Low battery indicator Uses 4 AA Alkaline batteries SAE J2791 & CE certified Made in the USA 2-year warranty including the sensor Unique numeric leak size indicator Visual LED leak alarm located near sensor Audio mute function Comfortable neoprene grip Carrying case included Sensitivity: 0.5 oz./yr R134a 0.03 oz./yr R22 Sensor Life: 300+ hours Response Time: Instantaneous Battery Life: 8 hours continuous Warmup Time: Less than 20 seconds Probe Length: 17”

Also known as: IPA-9007, IPA9007; Features and Benefits: Compact, lightweight, battery powered trailer tester Includes 2 internal batteries and charger Advanced diagnostics provide quick short, crossed and open circuit identification, along with ground check Remote controlled and portable Eliminate guess work on 7 round pin trailersThe Smart-MUTT® is a compact processor controlled and remote controlled trailer tester designed for optimum portability. With the included internal battery, you can test the trailer’s lights anywhere without the need of a truck or test light. The Smart-MUTT® weighs just 15 lbs and comes with a battery charger. Simply turn the dial to the desired circuit and the Smart-MUTT® powers up the trailer lights. The two 5 Ah internal batteries provide enough power to test several trailers before needing a recharge. The Smart-Mutt® features a 7-round pin socket for semi style trailers. The faceplate of the Smart-Mutt® is user friendly with pin configuration diagrams and easy-to-use instructions.