Hand Tools Tooltopia - Product Search

Also known as: NCT5020; Features and Benefits: Proprietary pneumatic planishing cylinder - Made in U.S.A. Heavy duty rectangular structural steel tubing frame Fully welded construction Adjustable cylinder up to 3000 BPM’s Five lower anvils included The Planishing Hammer frame is constructed of 3" x 2" x .250" wall rectangular steel tubing, triple gusseted to prevent deflection or movement with continuous welds at every joint to provide strength and rigidity. While most planishing hammers use a riveting type hammer, this unit uses a specially designed American made reciprocating cylinder manufactured exclusively for planishing (patent pending), operating on standard shop air with thumbscrew control.(optional foot pedal also available) The conveniently located adjustable flow control valve provides the proper BPM needed to achieve excellent results while crowning, shrinking, flattening or forming. The adjustable yoke can be adjusted and locked, to accommodate any material thickness, on a precision acme thread lead screw with a comfortable hand wheel. Unit is equipped complete with hardened steel hammer head and five forming dies (Crowning, Shrinking, Flattening and two (2) Forming). Combine this unit with the Universal Base (NCT5010) for a solid and stable foundation which is critical during planishing and forming. Made completely in USA and carries a two-year manufacturer’s defect warranty.

Also known as: OTC-3908, OTC3908; OTC AMP Clamp/Multimeter was designed to allow accurate current measurements using clamp jaws. The clamp meter is well suited for testing starting/ charging circuits, and provides easy access to current, voltage and other key automotive measurements, all in one easy to use tool. Duty Cycle Resistance Capacitance Diode Continuity Frequency Temperature Display maximum reading of 4000 counts Range auto/manual Automatic negative polarity indication Automatic zero adjustment Over range indication Low battery symbol Data hold symbol Relative measurement symbol Clamp opening size 32mm Auto power off AC/DC Voltage: 600V AC/DC Current: 1000A Operating Environment Temperature: 32 to 104°F (0°C to 40°C), Humidity: < 80% RH Storage environment temperature: -4 to 140°F (-20°C to 60°C), Humidity: < 90% RH Kit Includes: Test leads, temperature probe, soft carry case, 9-volt battery

Also known as: MCL-1350, MO 1350, MOC1350; Features and Benefits:The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa Hook end is 2 1/2" wide.Specifications: Gripping surface: 2 1/2" wide (63 mm), 1" deep (25 mm) Overall length: 8" (203 mm) Weight: 6 lbs. (2.72 kg) Capacity: 8 tons (7, 257 kg)

Also known as: MCL-0440, MO 0440, MO 440, MOC0440; Features and Benefits: Gripping surface: 4" wide (102 mm) Overall length: 8" (203 mm) Weight: 8 lbs (3.63 kg) Height: 3" (76 mm) Capacity: 5 tons (4, 536 kg)Self-tightening, twin claw jaws and drop-forged wedge distribute the clamping load - reducing the possibility of metal tearing.  Sever duty tooth is designed for maximum gripping bite and minimized metal distortion.  The jaw openings allow use around lips of core supports and aprons, clamps to floor pans and other pulls.  Made of heat treated steel.

Also known as: OTC-3835, OTC3835; Features and Benefits: Combine TPR activation with the power of Genisys Scan Activates TPMS Sensors Reads and stores Sensor Data Transmits TPMS Sensor Data to Genisys Scan Tool Includes Tools and POP materialCombine the activation and the wireless TPR capabilitieswith the Genisys for complete TPMS service. The OTC TPR is a fast and simple to use stand alone TPMS activation tool. This Tire Pressure Monitoring System Reset Tool Master Kit Includes: TPR handheld, DB25 wireless adapter, carry case, registration card, user manual for TPR, and Genisys® interface, activation magnet, valve stem torque wrench, valve nut torque wrench, digital tire pressure gauge, TPMS Poster, TPMS flip charts, 11mm socket, 12mm socket, and torque tool.

Also known as: KTI0810; Features and Benefits Hang Tag Bar Coded Labels Includes 1/4" and 3/8" drive Torq and Hex Bits in SAE and Metric Less Space Used with more coverage Store is attractively merchandized New Products Displayed Well54 pieces of 42 part numbers of Torq and Hex Bits in SAE and Metric. Display Board also includes four sets.  Board includes the following:(2) KTI21810 1/4" drive Torq bit T-10(2) KTI21815 1/4" drive Torq bit T-15(2) KTI21820 1/4" drive Torq bit T-20(2) KTI21825 1/4" drive Torq bit T-25(2) KTI21827 1/4" drive Torq bit T-27(2) KTI21830 1/4" drive Torq bit T-30(1) KTI22800 9 piece Torq socket set(1) KTI22801 12 piece Torq socket set(2) KTI22840 3/8" drive Torq bit T-40(2) KTI22845 3/8" drive Torq bit T-45(2) KTI22847 3/8" drive Torq bit T-47(2) KTI22850 3/8 drive Torq bit T-50(2) KTI22855 3/8" drive Torq bit T-55(2) KTI22860 3/8" drive Torq bit T-60(1) KTI22870 external Torq socket set(1) KTI22874 external Torq E-4 1/4" drive(1) KTI22875 external Torq E-5 1/4" drive(1) KTI22876 external Torq E-6 1/4" drive(1) KTI22877 external Torq E-7 1/4" drive(1) KTI22878 external Torq E-8 1/4" drive(1) KTI22880 external Torq E-10 3/8" drive(1) KTI22882 external Torq E-12 3/8" drive(1) KTI22884 external Torq E-14 3/8" drive(1) KTI22886 external Torq E-16 3/8" drive(1) KTI22888 external Torq E-18 3/8" drive(1) KTI22904 hex bit 1/8"(1) KTI22905 hex bit 5/32"(1) KTI22906 hex bit 3/16"(1) KTI22907 hex bit 7/32"(1) KTI22908 hex bit 1/4"(1) KTI22910 hex bit 5/16"(1) KTI22912 hex bit 3/8"(1) KTI22970 7 piece 3/8" drive hex bit SAE set(1) KTI27903 metric hex bit 3mm(1) KTI27904 metric hex bit 4mm(1) KTI27905 metric hex bit 5mm(1) KTI27906 metric hex bit 6mm(1) KTI27907 metric hex bit 7mm(1) KTI27908 metric hex bit 8mm(1) KTI27910 metric hex bit 10mm(1) KTI27955 metric hex bit 5.5mm(1) KTI27970 7 Piece 3/8" drive hex bit metric set

Also known as: MCL-5800, MO 5800, MO5800, MOC5800; Mo-Clamps G Clamp means easier pulling, with multiple pulling angles.The G Clamp has a throat opening of 4 inches allowing plenty of room to get over, around and behind the damage. And the movable shackle means more versatility. Made of heat-treated alloy steel, cast for extra strength. Includes swivel pad. Specifications:Overall length: 10 1/2" wide (267 mm)Overall width: 6" (152 mm)Weight: 6 lbs. (2.72 kg)Capacity: 5 tons (4, 536 kg)Replacement Parts: #4055 Screw Pin Shackle - #520034 Main Shaft - #840065 Swivel Pad

Also known as: OTC-1127, OTC1127; Bearing Splitter Feature knife-like edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic puller, puller jaws grip attachments outer edge; when used with a Push-Puller, puller legs are threaded into the attachments two tapped holes. No. 1127 Max. spread 13-3/8" Min. spread 3/4" Thread of tapped hole in adapter. 1"14 Distance between adjusting screws. 10-1/4" Use with puller Nos. 1047, 1073, and 939.

Also known as: MCL-4050, MO 4050, MO4050; The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has raised ears to hold bolts stationary, for easy tightening. Specifications:Gripping surface: 3 3/4 wide (95 mm), 3/4 deep (19 mm)Overall length: 7 (178 mm)Weight: 8 lbs. (3.63 kg)Capacity: 4 tons (3, 629 kg) Replacement Parts: #5325 Nut, Bolt & Washer - #200130 Pull Plate - #200131 Side Pull Bracket

Also known as: MCL-0550, MO 0550, MO 550, MOC0550; Features and Benefits: Gripping Surface: 1-1/2" wide (38 mm), 1/2" deep (13 mm) Overall Length: 6-1/2" (165 mm) Weight: 3 lbs (1.36 kg) Capacity: 3 tons (2, 722 kg)Mo-Clamp’s new design, the "Tight opening clamp", has all the same gripping dimension requirements as the old design.   Redesigned and strengthened with our totally new screw drive mechanism.   Still a full 3 ton capacity, able to reach core support and upper sheet metal areas where no other can.  Perfect for small pick-up frame rails.

Also known as: MCL-0200, MO 0200, MO 200, MOC0200; Features and Benefits: Gripping surface: 2" wide (50 mm), 5/8" deep (16 mm) Overall length: 8 1/2" (215 mm) Weight: 7 lbs (3.18 kg) Capacity: 5 tons (5, 436 kg) Heat treated steelSelf-Tightening. Its 1" (39 mm), throat clearance fits over a flange or frame horn, or around a lip to pull from behind.  Original wedge and  straight cut tooth design.