Upper Tooltopia - Product Search

Also known as: WAE-76462, WAE76462; Features and Benefits There’s no faster way to detect fuel injector firing, even when you can barely see them No hunting for the injector wires or upper plenum disassembly to test at the connector The probe is specifically tuned to detect the vibration frequencies caused when the fuel injector pintle snaps open Each time the injector opens the LED strobe flashes Made in the USA, and backed by a Limited Lifetime WarrantyThe Model 76400 Electronic Fuel Injector Quick Probe has a super bright LED Strobe which allows you to visually monitor the injector pintle for consistent firing or misfires.  Simply press the probe tip against the injector body and the bright LED strobe will flash with each time it opens. The battery operated main unit with removable 7" probe tip allows access to virtually any injector even if they are buried under the upper intake plenum.

Also known as: SCH68600, SLY-68600, SP 68600, SP68600; This unique tool was designed to remove and install lower ball joints on the carversus removing the steering knuckle and using a press. Using an air hammer, the job of removing and installing ball joints is a simple procedure saving 1 hour per side The tool has two main parts that attach to the air hammer, a remover and installer The remover easily fits over the lower end of the ball joint to drive the old ball joint out of the steering knuckle. The installer has been designed to fit around the upper portion of the steering knuckle enabling a straight push for the new ball joint. The installer couples with one of three different sizes of installer heads that drive in the new ball joint without damaging it Works on: Honda, Civic 1991-1997, Accord 1990-2002, Prelude 1988-1991 & 1996-1998, Odyssey 1995-1997, Acura Legend 1988-1995, Integra 1992-2001 & TL 1996-2003 Made in Taiwan Weight: 2.6 lbs 10" X 5.25" X 2"

Also known as: AP 7868, AP7868, APT-7868, AST-7868, AST7868; Features and Benefits: Works on Ford, GM, and Chrysler vehicles with Saginaw Fits 1-1/8", 1-1/4", 1-5/16", 1-3/8" Pulley Hub Diameter Works on press fit upper and lower ball joints This set includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997.

Also known as: OTC-7068, OTC7068; Features and Benefits: Includes all adapters needed for quick bushing removal/installation without removing control arm from vehicle Mechanical screw power quickly removes the worn bushing and installs the new one without damaging the control arm Includes C-frame, screw assembly, and all adapters and inserts necessary to do the job correctlyNow you can easily replace press-in type upper control arm bushings on most rear wheel drive Ford, GM, and Chrysler vehicles.

Also known as: OTC-6529-6, OTC6529-6, OTC65296; Features and Benefits: 15 adapters included to remove and install ball joints Works on upper and lower ball joints on: 1996 – 2008 Toyota, Hyundai, Kia, Infinity, Saab, and Nissan cars with press in ball joints Vehicle application chart and diagrams included For use with OTC USA made C frame Does not include the 7248 C-Frame pressIncludes reference guide thru 2008 referencing press fit or bolt in ball joints, adapter application diagrams and charts, and quick reference charts.

Also known as: OTC-6539-1, OTC6539-1, OTC65391; Features and Benefits: 35 adapters included to remove and install ball joints Vehicle application chart and diagrams included Works on upper and lower ball joints on 1996-2008 Toyota, Honda, Acura, Hyundai, KIA, Infinity, Isuzu, and Nissan Trucks, Vans, and SUV’s with press in ball joints For use with OTC USA made C frame 7248 Does not include the 7248 C-Frame press

Also known as: OTC-6529-4, OTC6529-4, OTC65294; Features and Benefits: 18 adapters included to remove and install ball joints Application cross reference and instructions included Works on upper and lower ball joints on: 1996 – 2008 Chevrolet, Buick, Pontiac, Oldsmobile, and Cadillac cars with press in ball joints For use with OTC USA made C frame Does not include the 7248 C-Frame pressIncludes reference guide thru 2008 referencing press fit or bolt in ball joints, adapter application diagrams and charts, and quick reference charts.

Also known as: OTC-6539-4, OTC6539-4, OTC65394; Features and Benefits: 29 adapters included to remove and install ball joints Works on upper and lower ball joints on 1996-2008 Buick, Cadillac, Oldsmobile, Pontiac, Chevrolet, GMC, and Hummer Trucks, Vans, and SUV’s Vehicle application chart and diagrams included For use with OTC USA made C frame, 7248 Does not include the 7248

Also known as: OTC-7704, OTC7704; Features and Benefits: For use on 1967-current 1/2- and 3/4-ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles) Weight: 2 lbs., 5 oz.This kit is used with ball joint service kit No. 7249 to remove and install upper and lower ball joints.

Also known as: OTC-6529-1, OTC6529-1, OTC65291; Features and Benefits: 11 adapters included to remove and install ball joints on BMW Cars Works on upper and lower ball joints on: 1992 – 1999 318 series, 1998 – 1999 323 series, 1996 – 1999 328 series, 1996 – 1999 M3 Vehicle application chart and diagrams included For use with OTC USA made C frame Does not include the 7248 C-Frame pressIncludes reference guide thru 2008 referencing press fit or bolt in ball joints, adapter application diagrams and charts, and quick reference charts.

Also known as: OTC-7894, OTC7894; Features and Benefits: Use with the No. 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints, and the offset ball joints used to change caster/ camber. Works on: 1984-newer "downsized" Jeep Wagoneer and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep Grand Cherokee; 1994-newer Dodge Ram 1/2-ton 4WD pickup Wt., 3 lbs.